About Drip Fittings

The Drip Store offer a wide range of drip fittings, from compression fittings, Spin Loc fittings, drip tape fittings and barbed fittings. Compression, Spin Loc and barbed fittings are used to connect 1/2" or 3/4" poly tubing. The compression fittings use a simple wrist action. The tubing is "walked" into the fittings for a very tight fit. No tools, glue or clamps are required. The 1/2" barb fittings are available in varies configuration and are used with 1/2" 16 mm or 17 mm) poly tubing. The poly tube is pushed over the barb to insure a leak-proof fit the. The Spin Loc have a sleeve that go over the tubing and provides the option to be used again. Make sure the fittings are the exact size for the 1/2" poly tubing used. 1/4" barb fittings are available in straight barbs, elbows, tees and cross to connect to the 1/2" poly tubing or to the 1/4" micro tube. The micro tube is pushed over the barb to insure a leak-proof fit.