Free shipping on orders $149 $99 & up. exclusions apply

3/4" .940 OD Compression Fittings


3/4"  .940 OD Compression Fittings

The Drip Store’s 3/4" compression drip fittings with .940 OD (Gray Insert) are used in the installation of drip irrigation using .940 OD drip tubing.

Category: 1/2" & 3/4" Compression

Available ModelsPartPrice
LF076 : 3/4 in.  PVC Insert
3/4" PVC InsertLF076$0.42 ea.
LF330 : 3/4”  .940 OD Compression Coupling  3/4” .940 OD Compression Coupling LF330$0.88 ea.
LF331 : 3/4”  .940 OD Compression Elbow
3/4” .940 OD Compression Elbow LF331$1.38 ea.
LF332 : 3/4”  .940 OD Compression Tee
3/4” .940 OD Compression Tee LF332$2.01 ea.
LF334 : 3/4”  .940 OD Compression End Cap
3/4” .940 OD Compression End Cap LF334$1.51 ea.
LF335 : 3/4”  .940 OD Compression Swivel Adapter and Screen  3/4” .940 OD Compression Swivel Adapter and Screen LF335$2.21 ea.
LF336 : 3/4”  .940 OD Compression Swivel Tee and Screen 3/4” .940 OD Compression Swivel Tee and ScreenLF336$2.82 ea.
LF337 : 3/4 in.   .940 OD Compression 3/4 in.  MHT Adapter
3/4" .940 OD Compression 3/4" MHT Adapter LF337$1.11 ea.
LF338 : 3/4” .940 OD Compression MPT Adapter
3/4” .940 OD Compression MPT Adapter LF338$1.21 ea.
LF339 : 3/4” .940 OD Compression Ball Valve Coupling
3/4” .940 OD Compression Ball Valve Coupling LF339$2.22 ea.
LF340 : 3/4” .940 OD Compression End Cap with Flush Valve
3/4” .940 OD Compression End Cap with Flush Valve LF340$2.56 ea.
LF341 : 3/4” .940 OD Compression Adapter to 3/4” PVC Slip
3/4” .940 OD Compression Adapter to 3/4” PVC Slip LF341$0.65 ea.
LF342 : 3/4 in.  FPT x 3/4 in.  .940 OD Compression Fitting (gray insert)
3/4" FPT x 3/4" .940 OD Compression Fitting (gray insert)LF342$0.87 ea.
LF345 : 3/4 in.  MPT x 3/4 in.  Barbed Fitting
3/4" MPT x 3/4" Barbed Fitting LF345$1.10 ea.
LF169 : 3/4 in.  x 1/2 in.  x 3/4 in. , Compression two-part tee (.940 OD x .700 OD)
3/4" x 1/2" x 3/4", Compression two-part tee (.940 OD x .700 OD) LF169$3.32 ea.
LF605 : 3/4 in.  (.940 OD) x 1/2 in.  (.700 OD) reducer tee w/ ball valve
3/4" (.940 OD) x 1/2" (.700 OD) reducer tee w/ ball valveLF605$4.70 ea.

The Drip Store's high impact 3/4” drip compression fittings with .940 OD are available in various configurations and are used in the installation of 3/4” drip tubing with.940 OD. By using a simple wrist action, the tubing is walked into the fittings for a very tight fit. No tools, glue, or clamps are required. Our .940 OD compression fittings are color coded and use a gray insert. Our compression fittings from NDS are made of high impact UV resistant plastic.

  • Color
    • LF330, LF331, LF332, LF334, LF335, LF336, LF337, LF338, LF339, LF340, LF341, LF169 : Black
    • LF342, LF169 : Gray
  • Flush Valve Opening Pressure
    • LF340 : 7 PSI
  • Materials
    • LF330, LF331, LF332, LF334, LF335, LF336, LF337, LF338, LF339, LF340, LF341, LF342, LF169 : Body and Inserts: ABS
  • Operating pressure
    • LF330, LF331, LF332, LF334, LF335, LF336, LF337, LF338, LF339, LF340, LF341 : 10 to 30 PSI
    • LF169 : up to 35 PSI
  • Color coded
  • Fits all DIG 3/4” polyethylene tubing with .940 OD
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps
    • LF330, LF331, LF332, LF334, LF335, LF336, LF337, LF338, LF339, LF340, LF341, LF342, LF169 : 3/4" with .940 OD Compression Fittings Suggested Installation Steps

       

      To connect the 3/4” drip tubing with .940 OD, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the drip tubing. Hold the fitting in one hand and the drip tubing in the other and force the tubing into the fitting while wiggling the drip tubing from side to side. "Walk" the drip tubing into the fitting until about 1/2” to 3/4" of the drip tubing is inside the fitting.