Free shipping on orders $149 up. exclusions apply

3/4” .940 OD Compression Coupling

3/4”  .940 OD Compression Coupling
In Stock

The 3/4” coupling is used to join two ends of drip hose together. The Drip Store’s 3/4” compression drip fittings with .940 OD (gray Insert) from NDS are used in the installation of drip irrigation using .940 OD drip tubing.

Part #: LF330
$0.88 ea.
  ( 2 ratings/reviews )

The Drip Store’s 3/4" compression drip fittings with .940 OD (gray INSERT) are used in the installation of drip irrigation using .940 OD drip tubing.

By: Onion Shed, 03/16/14

Not as pictured which is no problem. Worked fine. Much easier to insert if pipe has warmed up. Don't mess up or you can't separate the coupler from the pipe. I guess you'd have to cut the pipe out.

By: Dlimenko, 12/25/12

Nice accessory. Never had a leak.
Not sure what to do when you make a mistake, though.

  • Color: Black
  • Materials: Body and Inserts: ABS
  • Operating pressure: 10 to 30 PSI
  • Color coded
  • Fits all DIG 3/4” polyethylene tubing with .940 OD
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps

3/4" with .940 OD Compression Fittings Suggested Installation Steps


To connect the 3/4” drip tubing with .940 OD, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the drip tubing. Hold the fitting in one hand and the drip tubing in the other and force the tubing into the fitting while wiggling the drip tubing from side to side. "Walk" the drip tubing into the fitting until about 1/2” to 3/4" of the drip tubing is inside the fitting.