Free shipping on orders $149 $99 & up. exclusions apply

3/4" Spin-Loc Fittings


3/4" Spin-Loc Fittings

Category: 1/2"-1” Spin-loc

Available ModelsPartPrice
LF070 : 3/4 in.  Spin-lock Connector with 3/4 in.  MHT
3/4" Spin-lock Connector with 3/4" MHTLF070$1.49 ea.
LF071 : 3/4 in.  x 3/4 in.  Spin-Loc Connector
3/4" x 3/4" Spin-Loc Connector LF071$1.79 ea.
LF115 : 1 in.  x 3/4 in.  x 1 in.  Spin lock reducer tee
1" x 3/4" x 1" Spin lock reducer teeLF115$8.21 ea.
LF345 : 3/4 in.  MPT x 3/4 in.  Barbed Fitting
3/4" MPT x 3/4" Barbed Fitting LF345$1.10 ea.
LF600 : 3/4 in.  x 1/2 in.  Spin Loc Reducer Tee
3/4" x 1/2" Spin Loc Reducer TeeLF600$5.68 ea.
LF074 : 3/4 in.  x 3/4 in.  Spin-Loc Connector Elbow
3/4" x 3/4" Spin-Loc Connector ElbowLF074$3.91 ea.
LF072 : 3/4 in.  x 3/4 in.  x 3/4 in.  Spin-Loc Connector Tee
3/4" x 3/4" x 3/4" Spin-Loc Connector TeeLF072$3.94 ea.
LF110 : 3/4” FHT Swivel Tee x 3/4 in.  x 3/4 in.  Spin-Loc
3/4” FHT Swivel Tee x 3/4" x 3/4" Spin-Loc LF110$4.76 ea.
LF073 : 3/4 in.  Spin-Loc Line End with Flush Valve
3/4" Spin-Loc Line End with Flush Valve LF073$2.46 ea.
LF075 : 3/4 in.  Male Pipe Thread x 3/4 in.  Spin-Loc Connector
3/4" Male Pipe Thread x 3/4" Spin-Loc ConnectorLF075$1.38 ea.
LF322 : 3/4” FHT Swivel  Adapter with Washer x 3/4 in.  Spin-Loc Connector
3/4” FHT Swivel Adapter with Washer x 3/4" Spin-Loc ConnectorLF322$2.04 ea.

The Drip Store’s 3/4” Spin-Loc fittings are used for the installation of 3/4” drip tubing or drip line (also available in 1/2” and 1”) with many configurations to meet the varying requirements in the installation and layout of drip tubing or drip line. The Drip Store’s Spin-Loc fittings can be easily removed and reinstalled, and their tight seals work exceptionally well for a wide range of applications.

  • Flush Valve Closing Pressure
    • LF071, LF115, LF074, LF072, LF110, LF075, LF322 : 7 PSI
  • Flush Valve Opening Pressure
    • LF071, LF115, LF074, LF072, LF110, LF075, LF322 : 7 PSI
  • Maximum pressure
    • LF070, LF071, LF115, LF074, LF072, LF110, LF073, LF075, LF322 : 60 PSI
  • Recommended pressure
    • LF071, LF115, LF074, LF072, LF110, LF073, LF075, LF322 : Up to 30 PSI
  • Size
    • LF070 : 3/4" .820 ID x .940 OD
  • Available to fit 1/2", 3/4" and 1” drip tubing or drip line
  • Made with high impact UV resistant plastic
  • No glue or tools are required
  • Secure and easy installation without glues or clamps
  • Tight seal, ensured by the rubber "O" ring on the barb ( 3/4" & 1" do not use an "O" ring)
    • LF071, LF115, LF074, LF072, LF110, LF073, LF075, LF322 : Installation for Spin-Loc Fittings
      The ½”, ¾” and1” Spin-Loc fittings uses a sleeve assembly over a body with a barb insert, allowing the user to easily install the many fittings configurations that night be needed throughout the installation of the drip tubing. The sleeve makes the Spin-Loc fittings easier to install and tighten. An advanced sealing interface with a long barb provides guides for the Spin-Loc to slide over the barb for a secure seal. Our Spin-Loc fittings are made of high impact UV resistant plastic and can last for many years.
       
      To connect the spin-lock fitting to the drip tubing or drip line we provides a number of steps
      Step 1: First, turn the sleeve of the fitting counter-clockwise
      Step 2: Push the drip tubing or drip line over the barb all the way in or as much as you can
      Step 3: Threaded the sleeve over the drip tubing or drip line to secure.
       
      Using the Spin-Loc fittings, drip tubing can be installed easily either above or below the ground. Use the Spin-Loc fittings to connect the drip tubing with other sections of drip tubing or PVC pipe.