1/2" Spin-Loc Fittings

Available Models		Part	Price
3 reviews	1/2" Spin-Loc Connector	LF050	$0.61 ea.
	3/4” FHT Swivel Tee with Washer x 1/2" x 1/2" Power-Loc	LF052R	$1.76 ea.
	3/4" Male Pipe Thread x 1/2" Power-Loc Connector	LF053R	$0.95 ea.
1 review	3/4" Male Pipe Thread x 1/2" Easy-Loc Connector	LF059	$0.73 ea.
1 review	1/2" x 1/2" Spin-Loc Connector Elbow	LF055	$1.58 ea.
2 reviews	1/2" x 1/2" x 1/2" Spin-Loc Connector Tee	LF051	$1.51 ea.
1 review	3/4” FHT Swivel Tee with Washer x 1/2" x 1/2" Spin-Loc	LF052		Discontinued
1 review	1/2" Spin-Loc Line End with Flush Valve	LF054	$1.99 ea.
	1/2" Male Pipe Thread x 1/2" Spin-Loc Connector	LF056	$0.64 ea.
1 review	3/4" Male Pipe Thread x 1/2" Spin-Loc Connector	LF053		Discontinued
	3/4" Male Hose Thread x 1/2" Spin-Loc Connector	LF057	$0.52 ea.
1 review	3/4” FHT Swivel Adapter with Washer x 1/2" Spin-Loc	LF323	$1.51 ea.

Description
Specifications
Features
Instructions

The Drip Store’s 1/2" Spin-Loc fittings are used for the installation of 1/2” .700 OD drip tubing or 17mm brown drip line (also available in 3/4" and 1”) with many configurations to meet the varying requirements in the installation and layout of drip tubing or drip line. The Drip Store’s Spin-Loc fittings can be easily removed and reinstalled, and their tight seals work exceptionally well for a wide range of applications.

Flush Valve Closing Pressure

LF050, LF055, LF051, LF052, LF054, LF056, LF053, LF057, LF323, LF115 : 7 PSI

Flush Valve Opening Pressure

LF050, LF055, LF051, LF052, LF054, LF056, LF053, LF057, LF323, LF115 : 7 PSI

Maximum pressure

LF050, LF053R, LF059, LF055, LF051, LF052, LF054, LF056, LF053, LF057, LF323, LF115 : 60 PSI

Recommended pressure

LF050, LF053R, LF055, LF051, LF052, LF054, LF056, LF053, LF057, LF323, LF115 : Up to 30 PSI

Use with

LF053R : .700" compression, nut lock and spin lock fittings

Available to fit 1/2", 3/4" and 1” drip tubing or drip line

Available with hose or pipe thread connection

Made with high impact UV resistant plastic

No glue or tools are required

Secure and easy installation without glues or clamps

Tight seal, ensured by the rubber "O" ring on the barb ( 3/4" & 1" do not use an "O" ring)

LF050, LF053R, LF055, LF051, LF052, LF054, LF056, LF053, LF057, LF323, LF115 : Installation for Spin-Loc Fittings
The ½”, ¾” and1” Spin-Loc fittings uses a sleeve assembly over a body with a barb insert, allowing the user to easily install the many fittings configurations that night be needed throughout the installation of the drip tubing. The sleeve makes the Spin-Loc fittings easier to install and tighten. An advanced sealing interface with a long barb provides guides for the Spin-Loc to slide over the barb for a secure seal. Our Spin-Loc fittings are made of high impact UV resistant plastic and can last for many years.

To connect the spin-lock fitting to the drip tubing or drip line we provides a number of steps

Step 1: First, turn the sleeve of the fitting counter-clockwise

Step 2: Push the drip tubing or drip line over the barb all the way in or as much as you can

Step 3: Threaded the sleeve over the drip tubing or drip line to secure.

Using the Spin-Loc fittings, drip tubing can be installed easily either above or below the ground. Use the Spin-Loc fittings to connect the drip tubing with other sections of drip tubing or PVC pipe.