The Drip Store’s Universal Nut Lock™ drip fittings are used to connect drip tubing of various dimensions. The Universal Nut Lock fittings can be used to connect drip tubing with .620 OD to drip tubing with .710 OD, providing a simple solution when you are not sure of the drip tubing size you have.
Category: 1/2" Universal Nut Lock
|Universal Nut Lock Tee||LF025||$1.68 ea.|
|Universal Nut Lock Coupling||LF026||$1.09 ea.|
|Universal Nut Lock Elbow||LF027||$1.47 ea.|
|Universal 1/2" x 3/4" FMPT x 1/2" Nut Lock Swivel Tee||LF028||$1.75 ea.|
The Drip Store’s high impact 1/2" Universal Nut Lock fittings are available to fit various sizes of drip tubing from .620 OD to 710 OD, providing a simple solution when adjoining sections of drip irrigation tubing are not the same size. The Universal Nut Lock fittings use a combination of barb and compression nut lock to connect different sizes of drip tubing, holding the drip tubing from the inside with the barb and from the outside with a compression type connection. Our Universal Nut Lock fittings are from DIG Corp and are made of high impact UV resistant plastic.
To connect any two sizes of poly drip tubing with .620 to .710 OD uses the following steps:
First step: Unthread the nut and slid the nut into the drip tubing side.
Second step: Push the drip tubing over the barb and then thread the nut to secure.