Free shipping on orders $149 & up. exclusions apply

5/8" Drip Tape Fittings


5/8" Drip Tape Fittings

The Drip Store’s wide range of 5/8” drip tape fittings have many features for easy installation and improved performance. The Drip Store drip tape fittings work exceptionally well and can be used with all major brands of drip tape.

Category: Drip Tape

Available ModelsPartPrice
A023 : 5/8 in.  Drip Tape Coupling 5/8" Drip Tape CouplingA023$0.85 ea.
A024R : 5/8 in.  Tape Loc x 1/2 in.  barbed connection with .600 ID for connection to a .600 ID x .700 OD polytubing.
5/8" Tape Loc x 1/2" barbed connection with .600 ID for connection to a .600 ID x .700 OD polytubing. A024R$0.66 ea.
A027 : 5/8 in.  Drip Tape Connector End  5/8" Drip Tape Connector End A027$0.40 ea.
A028 : 5/8 in.  Drip Tape Connector to 1/2 in.  Male Pipe Thread
5/8" Drip Tape Connector to 1/2" Male Pipe ThreadA028$0.81 ea.
A026 : 5/8 in.  Drip Tape Connector to 1/4 in.  Barb  5/8" Drip Tape Connector to 1/4" Barb A026$0.58 ea.
A025 : 3/4 in.  FHT Swivel Adapter with Screen x 5/8 in.  Drip Tape
3/4" FHT Swivel Adapter with Screen x 5/8" Drip Tape A025$2.49 ea.
A024 : 5/8 in.  Drip Tape Adapter to .700 OD Drip Tubing 5/8" Drip Tape Adapter to .700 OD Drip TubingA024Discontinued
A090 : 5/8 in.  x 5/8 in.  x 5/8 in.  Drip Tape Connector Tee
5/8" x 5/8" x 5/8" Drip Tape Connector TeeA090$1.90 ea.
A091 : 5/8 in.  x 5/8 in.  Drip Tape Connector Elbow
5/8" x 5/8" Drip Tape Connector ElbowA091Discontinued
A031 : 5/8 in.  Drip Tape line end with Flush Cap 5/8" Drip Tape line end with Flush CapA031$1.76 ea.
A092 : 5/8 in.   x 5/8 in.  Drip Tape Coupling with Shut-Off Valve
5/8" x 5/8" Drip Tape Coupling with Shut-Off ValveA092$2.28 ea.
A093 : 5/8 in.  Drip Tape Connector x 1/4 in.  Barb with Shut-Off Valve
5/8" Drip Tape Connector x 1/4" Barb with Shut-Off ValveA093$2.28 ea.
A087 : 5/8 in.  x 5/8 in.  Ro-Drip Tape Coupling
5/8" x 5/8" Ro-Drip Tape Coupling A087$0.50 ea.
A088 : 5/8 in.  Tape Line End with Flush Valve
5/8" Tape Line End with Flush Valve A088$2.01 ea.
A099 : 5/8 in.  Drip Tape to Lay Flat
5/8" Drip Tape to Lay FlatA099$0.62 ea.
A089 : 3/4 in.  MHT x 5/8 Ro Drip Tape End Cap
3/4" MHT x 5/8 Ro Drip Tape End Cap A089$0.97 ea.
LF601 : 1/2 in.  .700 OD Compression x 5/8 in.  Drip Tape Connection Tee
1/2" .700 OD Compression x 5/8" Drip Tape Connection TeeLF601$3.23 ea.

The Drip Store’s 5/8” drip tape fittings are used for the installation of 5/8” drip tape. The drip tape fittings are available with many configurations (and in a variety of sizes) to meet any requirements in the installation layout of a drip tape. The Drip Store’s drip tape fittings work exceptionally well up to 30 PSI and can be used with all major brands of drip tape.

  • Flush Valve Closing Pressure
    • A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A099, A089 : 7 PSI
  • Flush Valve Opening Pressure
    • A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A099, A089 : 7 PSI
  • Operating pressure
    • A027 : up to 25 PSI
    • A088 : up to 60 PSI
  • Recommended pressure
    • A024R : 10 to 30 PSI
  • Recommended pressure
    • A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A088, A099, A089 : Up to 30 PSI
  • Fits all brand name 5/8” drip tape
  • Made with high impact UV resistant plastic
  • No glue or tools are required
  • Secure and easy installation without glues or clamps
    • A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A088, A099, A089 : Installation for Drip Tape
      Drip tape can be installed easily either above or below the ground. The fittings are designed mainly for use in vegetable gardens or for row crops below or above grade.  Use these drip tape fittings to connect a 5/8” drip tape into drip tubing, PVC pipe or lay-flat pipe.
       
      Basic layout:
      Most often, a vegetable garden or row crops is planted in parallel rows. This makes the layout of a drip tape very easy. If using a poly tubing as the main line per each zone, run the mainline of 1/2", 3/4" or 1” drip tubing perpendicular and along the rows and to the end of the designed zone.  
      Steps to install the drip tape:
      Step 1: Near each row, punch a hole in the drip tubing using a punch.
      Step 2: Insert a drip tape reducer (see A026) into the drip tubing by inserting the barb side of the drip tape, with one per each row.
      Step 3: Connect the drip tape into the tape connector side by turning the sleeve counter-clockwise, inserting the drip tape over the barb end of the connector and turning the sleeve clockwise to lock.
      Step 4: Lay out the drip tape along the row and near the plants
      Step 5: Turn the water on and flush the line
      Step 6: Close the end of the drip tape using the tape end model A027, A031 or A033 with flush valve