Free shipping on orders $149 & up. exclusions apply

Mini sprinkler spinner with 32 GPH nozzle only, red


Mini sprinkler spinner with 32 GPH nozzle only, red
In Stock

The 360 degree mini sprinkler is an insect proof dynamic micro sprinkler suite for irrigation under tree canopy seedlings, flowerbeds, ground-cover, young saplings, mature trees, in greenhouses and nurseries. The min sprinkler is available with 6 flow rates heads and five fully assembled mini sprinklers with a spike, 24” micro tubing and barb.

Part #: MSA028-1
$0.47 ea.

The 32 GPH, 360 degree mini sprinkler red spinner with nozzle is an insect proof dynamic micro sprinkler suite for irrigation under tree canopy seedlings, flowerbeds, ground-cover, young saplings, mature trees, in greenhouses and nurseries. The mini sprinkler the one of six flow rates spinner with nozzle can be used as a replacement part for the fully assembled mini sprinklers with a spike, 24” micro tubing and barb.

  • Diameter of Coverage: 6' to 17'
  • Droplet Size: Medium
  • Filter requirement: Up to 24 GPH 120 Mesh 24 GPH and up to 80 Mesh
  • Flow rate: 32 GPH
  • Materials: Polyacetal
  • Operating pressure: 25 to 35 PSI
  • Operating Pressure in Overlapping Irrigation: 35 PSI
  • Pattern: Full Circle 360°
  • Trajectory Angle: Approximately 30°
  • Anti-insect spinner closes when irrigation cycle is complete
  • Can operate upside down to reduce wetting diameter for young trees
  • Dynamic operation ensures self-cleaning and prevents accumulation of deposits which make it desirable for irrigation in water containing iron and calcium
  • Excellent performance with uniform water distribution
  • Frame construction without a bridge provides a complete 360 degree circle
  • Large water passage 6 nozzles achieving flow rates from 10 to 42 GPH
  • Trouble free operation even at low pressure

Installation for Mini Sprinklers

To install the 360 degree mini sprinkler use the complete assembly with spike micro tubing and barb. To replace the head of the mini sprinkler, pull the head with the nozzle out of the assembly and replace with a new head with nozzle. Make sure to flush the line before inserting the new head with the nozzle, no tool or glue is required.

To install the mini sprinklers, first select the flow rate and the mini sprinkler diameter. Use the assembly with the spike and the micro tubing by first inserting the spike into the ground for about 2-4”, then punch a hole into the side of the drip tubing using a punch and then insert the barb on the micro tubing into the drip tubing.

Flow Rate Versus Pressure in PSI

Color

25 PSI

Nominal flow @ 30 PSI

35 PSI

Blue

9.9

10

11.7

Gray

14.9

15

17.6

Black

17.4

18

20.5

Green

22.3

24

26.4

Red

29.7

32

35.2

Brown

39.7

42

46.9

Diameter

10’

11’

13’

14’

16’

17’