Mini sprinkler spinner with 42 GPH nozzle only, brown

In Stock

The 360 degree mini sprinkler is an insect proof dynamic micro sprinkler suite for irrigation under tree canopy seedlings, flowerbeds, ground-cover, young saplings, mature trees, in greenhouses and nurseries. The min sprinkler is available with 6 flow rates heads and five fully assembled mini sprinklers with a spike, 24” micro tubing and barb.

Part #: MSA039-1

$0.47 ea.

Part family: 360 Degree Mini Sprinkler with Nozzle

Description
Specifications
Features
Instructions

The 42 GPH, 360 degree mini sprinkler brown spinner with nozzle is an insect proof dynamic micro sprinkler suite for irrigation under tree canopy seedlings, flowerbeds, ground-cover, young saplings, mature trees, in greenhouses and nurseries. The mini sprinkler the one of six flow rates spinner with nozzle can be used as a replacement part for the fully assembled mini sprinklers with a spike, 24” micro tubing and barb.

Diameter of Coverage: 6' to 17'
Droplet Size: Medium
Filter requirement: Up to 24 GPH 120 Mesh 24 GPH and up to 80 Mesh
Flow rate: 42 GPH
Materials: Polyacetal
Operating pressure: 25 to 35 PSI
Operating Pressure in Overlapping Irrigation: 35 PSI
Pattern: Full Circle 360°
Trajectory Angle: Approximately 30°

Anti-insect spinner closes when irrigation cycle is complete
Can operate upside down to reduce wetting diameter for young trees
Dynamic operation ensures self-cleaning and prevents accumulation of deposits which make it desirable for irrigation in water containing iron and calcium
Excellent performance with uniform water distribution
Frame construction without a bridge provides a complete 360 degree circle
Large water passage 6 nozzles achieving flow rates from 10 to 42 GPH
Trouble free operation even at low pressure

Installation for Mini Sprinklers

To install the 360 degree mini sprinkler use the complete assembly with spike micro tubing and barb. To replace the head of the mini sprinkler, pull the head with the nozzle out of the assembly and replace with a new head with nozzle. Make sure to flush the line before inserting the new head with the nozzle, no tool or glue is required.

To install the mini sprinklers, first select the flow rate and the mini sprinkler diameter. Use the assembly with the spike and the micro tubing by first inserting the spike into the ground for about 2-4”, then punch a hole into the side of the drip tubing using a punch and then insert the barb on the micro tubing into the drip tubing.

Flow Rate Versus Pressure in PSI
Color	25 PSI	Nominal flow @ 30 PSI	35 PSI
Blue	9.9	10	11.7
Gray	14.9	15	17.6
Black	17.4	18	20.5
Green	22.3	24	26.4
Red	29.7	32	35.2
Brown	39.7	42	46.9