DIG Corporation's Single Bridge, 360° Micro Sprayer Assembly

The Single Bridge, 360° micro sprayers are available with 13” stake, 24” micro tubing and 1/4" barb. The 360° micro sprayer assembly from DIG Corporation is designed for applications including seedlings, rooting, flowerbeds and for greenhouse use. The sprayers have flow rates of 9 to 42 GPH @ 30 PSI with spray pattern of up to 12’ diameter. The micro sprayers produce fine droplets and are available with a number of flow rates options. This micro sprayer is ideal for maintaining conditions conducive to germination and seedlings.

Categories: Micro Sprayers, Orchard Irrigation, DIG Micro Sprinklers

Available Models		Part	Price
	360° Micro Sprayer Assembly 18 GPH Black	MSA043	$1.38 - $1.67 ea.
	360° Micro Sprayer Assembly 42 GPH Brown	MSA044	$1.38 - $1.67 ea.

Description
Specifications
Features
Instructions

Assembly includes

MSA030, MSA043, MSA044 : spike, micro tubing and barb

Available with three flow rates

MSA043 : Black nozzle: 18 GPH with up to 9’ diameter
MSA030 : Blue nozzle: 9 GPH with up to 8’ diameter
MSA044 : Brown nozzle: 42 GPH with up to 12’ diameter

Droplet Size

MSA030, MSA043, MSA044 : .0008", very fine at 45 PSI

Filter requirement

MSA030, MSA043, MSA044 : 120 mesh (130 micron)

Materials

MSA030, MSA043, MSA044 : Polyacetal

Nominal operating pressure

MSA030, MSA043, MSA044 : 30 PSI

Operating Pressure in Overlapping Irrigation

MSA030, MSA043, MSA044 : 35 PSI

Operating pressure

MSA030, MSA043, MSA044 : 25 to 35 PSI

Pattern

MSA030, MSA043, MSA044 : 340°

Trajectory Angle

MSA030, MSA043, MSA044 : Approximately 1°

Wetting diameter

MSA030, MSA043, MSA044 : up to 12’'

Color coded nozzles for flow rate identification

Excellent performance with uniform water distribution

High uniformity due to distribution accuracy and low precipitation rate

Maintains constant humidity if used in greenhouses

Modular design allows for a wide range of interchangeable components

Installing Micro Sprayer Assembly
To install the micro sprayer use the complete assembly with spike, micro tubing and barb.

To install the micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayerwith the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.