Category: Micro Sprayers
|C-Frame, 360°, 7 GPH Small Diameter Micro Sprayer Head Only||MS040||$0.27 ea.|
|C-Frame, 360°, 8 GPH Small Diameter Micro Sprayer Head Only||MS041||$0.27 ea.|
|C-Frame, 360°, 9 GPH Small Diameter Micro Sprayer Head Only||MS042||$0.27 ea.|
|C-Frame, 360°, 7 GPH Small Diameter Micro Sprayer Assembly||MSA040||$1.64 ea.|
|C-Frame, 360°, 8 GPH Small Diameter Micro Sprayer Assembly||MSA041||$1.64 ea.|
|C-Frame, 360°, 9 GPH Small Diameter Micro Sprayer Assembly||MSA042||$1.64 ea.|
The C-Frame, 360 micro sprayer with 45° downward trajectory is available with 10/ 32 thread or with 12" galvanized wire stake, micro tubing and 1/4" barb. The 360-degree micro sprayer assembly is designed for the application of water to small trees or pots of up to 24” to target the root zone, reducing drainage and eliminating over-spray. The C-Frame sprayers have flow rates of 7 to 9 GPH @ 20 PSI with spray patterns of up to 2’ diameter at a height of 8” above ground. The micro sprayers produce small droplets and are available with three flow rate options.
To install the micro sprayer use the complete assembly with spike, micro tubing and barb. If using the micro sprayer with "Quick" thread, use it with one of our poly riser assemblies available in our accessories section.
To install the micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayerwith the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.