Free shipping on orders $149 & up. exclusions apply

C-Frame, 360°, 8 GPH Small Diameter Micro Sprayer Head Only


C-Frame, 360°, 8 GPH Small Diameter Micro Sprayer Head Only
In Stock

The 360-degree C-frame micro sprayer is available with "Quick" thread. The micro sprayer has a flow rate of 8 GPH @ 20 PSI with spray pattern of up to 1.8’ in diameter. This series of sprayers has no moving parts and can be used in small trees or for pots of up to 24” diameter.

Part #: MS041
$0.27 ea.

The Drip Store has a wide range of micro sprayers and jets to meet all of today‘s requirements for micro irrigation needs. The no moving parts micro sprayer can be used for a wide range of applications and is available in a 360° pattern with 45° downward trajectory, used for very small diameters and for watering that requires fine droplet size with low precipitation rate. When low volume overhead irrigation is desired for an area where drip emitters are not practical and micro sprinkler diameters and moving parts are not required nor preferred, the micro sprayers or jets may be what are needed. Like micro sprinklers, micro sprayers and jets are available in a wide variety of styles, flow rates, diameters, and configurations. Like micro sprinklers, they operate at low pressure and require a filter to protect the small orifice of the sprayer from clogging. The main advantages of micro sprayers to some users and growers could be the lack of moving parts, the small to medium sized droplets and the small diameter coverage.

  • "Quick" thread with sealing thread 0.16:
  • Assembly includes: "Quick" thread, galvanized wire stake, micro tubing and barb
  • Available with three flow rates: Brown nozzle: 8 GPH with up to 1.8' diameter
  • Materials: Polyacetal
  • Operating pressure: 10 to 20 PSI
  • Recommended filtration: 120 mesh
  • Recommended pressure: 20 PSI
  • Trajectory Angle: 45° downward
  • Can be attached into the end of 1/4" micro tubing or into the 1/2" drip tubing.
  • Can be replaced with one of three available sprayers
  • Color coded for easy identification
  • Constructed of UV-resistant durable plastic materials, ensuring resistance to most chemicals and fertilizers used in landscape applications
  • Made of durable UV-resistant plastic
  • Trouble free operation with no moving parts

Installation for C-Frame Micro Sprayers

To install the micro sprayer use the complete assembly with spike, micro tubing and barb. If using the micro sprayer with "Quick" thread, use it with one of our poly riser assemblies available in our accessories section.

To install the micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayerwith the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.