The downward facing spray pattern in the SPOT-SPITTER spray stick system from John Deere Water Product line is one of the most cost-effective, versatile solutions for your nursery watering application.
Category: Spot Spitters
|Spot-Spitter, Down Spray Stick, Flo Rate 3.6 GPH Color Orange,||D310||$0.19 ea.|
|Spot-Spitter, Down Spray Stick, Flo Rate 4.8 GPH Color L. Green||D313||$0.19 ea.|
These spot spitters have a downward facing spray pattern which prevents overspray on smaller nursery containers.
The SPOT-SPITTER spray stick from John Deere Water Product line is one of the most cost-effective, versatile solutions for your nursery watering application.
Low cost and ease of installation have made this product line a favorite among nurseries and growers worldwide. With a wide range of flow rates and wetting patterns, and using specially sized 1/8” micro tubing, the right spray stick to fit your nursery application is easy to choose. This range of spray sticks are color-coded and with 90, 160, and 360-degree spray patterns.
The Drip Store includes all the components needed for installation.
To install the SPOT-SPITTER use the suggested micro tubing with the correct ID and OD. To replace the spray stick, just pull it out of the micro tubing, and replace with a new head of the same color. Make sure to flush the line before inserting the new spray stick. No tool or glue is required.
To install the SPOT-SPITTER into the drip tubing lateral, first select the flow rate and the spray stick degree of coverage, then insert the spray stick into the 1/8” micro tubing. Next, punch a hole into the side of the drip tubing using a 4 mm punch, and then insert the micro tubing into the drip tubing. No barb connector or other parts are needed.