Free shipping on orders $149 $99 & up. exclusions apply

Punch with 8 hole mm pin for use with 1/2" starter barbed connector model LF318/LF319


Punch with 8 hole mm pin for use with 1/2 in.  starter barbed connector model LF318/LF319
In Stock
Insert the large side side of the barb into the lateral. Then, using the black punch with 8 mm pin, insert the small side of the barb into the supply tubing.

Use with LF318 or LF319 connector to start a drip lateral from a 3/4" or 1" drip tubing. To insert it into a 3/4" or 1" drip tubing, punch a hole into the drip tubing using the A036 black punch with the 8 mm pin and insert the small barb into the tubing. insert the other side side of the barb into a 1/2" or 17 mm drip tubing or drip line.

Part #: A036
$22.49 ea.

The punches and cutters offered by The Drip Store are accessories used in installation of a micro irrigation system. They are used to punch holes into the drip tubing for the insertion of starter barbed connectors.

  • Used to punch holes into the drip tubing or to cut the drip or micro tubing
  • UV resistant, high impact plastic