The Katif palm punch is constructed of heavy duty plastic and fits comfortably in your hand when punching precise holes in any size drip tubing from 3/4" and up. Use this tool when installing large starter barb LF318 for both 1/2" .700 OD polytubing and 17 mm dripline laterals. This punch removes the residual debris formed as it punches a hole in the drip tubing. We recommend cleaning the punch to make sure that the material does not accumulate inside the metal pin.
Category: Punches & Tools
|Punch with 8 hole mm pin for use with 1/2" starter barbed connector model LF318||A036||$22.49 ea.|
|Katif Palm Punch||A039||Discontinued|
Punches and drip tubing cutters are common tools used in the layout and installation of a micro irrigation system. The punches come in various sizes and are used to punch holes in the drip tubing for the insertion of drip emitters or 1/4" barbed fittings. The drip tubing cutters are used to cut the drip tubing where needed. Together, the punches and cutters provide the installer with the main tools needed for the installation of a drip irrigation system.
The punches and cutters offered by The Drip Store are accessories used in installation of a micro irrigation system. They are used to punch holes, to cut or to insert connectors into the drip or micro tubing. The Drip Store’s range of punch and cutter accessories includes:
· Basic palm punches: Inexpensive and used only for punching holes into drip tubing.
· Professional Gun Punch: Used for punching a large number of holes into drip tubing, using a durable heavy-duty heat-treated pin.
· Professional Gun Punch with Tubing Cutter: Used for punching a large number of holes into the drip tubing, using a durable, heavy-duty heat-treated pin and includes a cutter to cut the drip tubing.
· Cutters: Used for cutting the drip tubing.