This is a simple drip tubing cutter that works like a staple gun. Place the drip tubing below the cutter and press, to make a clean cut. This tool can be used to cut vinyl micro tubing or 1/2” polyethylene drip tubing. This tool should be handled with care, and should not be left near children.
Category: Punches & Tools
|Tubing Cutter||A156||$7.26 ea.|
Punches and drip tubing cutters are common tools used in the layout and installation of a micro irrigation system. The punches come in various sizes and are used to punch holes in the drip tubing for the insertion of drip emitters or 1/4” barbed fittings. The drip tubing cutters are used to cut the drip tubing where needed. Together, the punches and cutters provide the installer with the main tools needed for the installation of a drip irrigation system.
The punches and cutters offered by The Drip Store are accessories used in installation of a micro irrigation system. They are used to punch holes, to cut or to insert connectors into the drip or micro tubing. The Drip Store’s range of punch and cutter accessories includes:
· Basic palm punches: Inexpensive and used only for punching holes into drip tubing.
· Professional Gun Punch: Used for punching a large number of holes into drip tubing, using a durable heavy-duty heat-treated pin.
· Professional Gun Punch with Tubing Cutter: Used for punching a large number of holes into the drip tubing, using a durable, heavy-duty heat-treated pin and includes a cutter to cut the drip tubing.
· Cutters: Used for cutting the drip tubing.