Free shipping on orders $149 & up. exclusions apply

Palm Punch for 1/8” Micro Tubing


Palm Punch for 1/8”  Micro Tubing
In Stock

The palm hole punch can be used to punch holes in any size drip tubing for the insertion of 1/8” micro tubing and 1/8" barb. The punch creates just the right sized hole in the drip tubing every time. Constructed of UV-resistant, high impact plastic.

Part #: A040
$3.01 ea.
  ( 1 rating/review )

The punches and cutters offered by The Drip Store are accessories used in installation of a micro irrigation system. They are used to punch holes, to cut or to insert connectors into the drip or micro tubing.

The Drip Store’s range of punch and cutter accessories includes:
Basic palm punches: Very inexpensive and used only for punching holes into drip tubing.

Professional Gun Punch: Used for punching a large number of holes into drip tubing, using a durable heavy-duty heat-treated pin.

Professional Gun Punch with Tubing Cutter: Used for punching a large number of holes into the drip tubing, using a durable, heavy-duty heat-treated pin and includes a cutter to cut the drip tubing.

Cutters: Used for cutting the drip tubing.

By: Falcon Aloft, 11/13/12

The tool is pretty much what you see in the picture: small, tough-looking, and not at all easy to use. It's ok for occasional punching, but get a gun if you're doing more than a few holes at a time. Yes, it's as tough as it looks!

  • Used to punch holes into the drip tubing or to cut the drip or micro tubing
  • UV resistant, high impact plastic