Free shipping on orders $149 $99 & up. exclusions apply

TOP Body assembly only


TOP Body assembly only

Category: Retrofit TwelveOutlets Drip Emitter Manilfod

Available ModelsPartPrice
D061 : TOP Body Assembly Only
TOP Body Assembly OnlyD061$4.71 ea.

The TOP 12-Outlet Drip Manifold from DIG is designed for first time installations or for retrofitting an existing sprinkler riser into an efficient 12-outlet drip irrigation system. The TOP concept utilizes unique self-cleaning, pressure compensating drip emitters enabling long runs with even water distribution from all outlets.

  • Dimensions
    • D061 : 3" W x 2" H
  • Emitter dimensions:
    • D061 : Inlet size: 1/2" FNPT
  • Flow rate and Color code:
    • D061 : .5 GPH per outlet: Black
    • D061 : 1 GPH per outlet: Red
    • D061 : 2 GPH per outlet: Green
    • D061 : 3.3 GPH per outlet: Purple
  • Manifold
    • D061 : accepts 1/8" (.187 OD) micro tubing, or purchase 1/4" micro tubing adapters separately for use with 1/4" distribution tubing
  • Materials
    • D061 : Body and cover: high impact plastic
    • D061 : Diaphragm : Silicon
    • D061 : Filter: nylon
  • Mini disc filter
    • D061 : 80 mesh
  • Pressure compensating range
    • D061 : 8 to 80 PSI
  • Recommended pressure
    • D061 : 15 to 50 PSI
  • 1/4" converter elbow and barb allow the use of 1/4" distribution tubing (Parts #D062-65 & SF006, sold separately).
  • 12 individually pressure compensating, self flushing emitters allow easy passage of water and minimize clogging
  • 12-outlet emitter
  • Backup mini-disk filter
  • Color-coded emitters and barbs easily identify flow rate at each zone
  • Each emitter individually filtered (approximately 80 mesh)
  • Flow rates .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3, 12.5 l/h)
  • Inlet plugs provide closure options of up to eight emitter outlets (Part #D075, sold separately)
  • Install above grade or place below grade in a 6" emitter box
  • Interchangeable emitters for variable flow rates in a single head
  • Rugged materials to withstand the most adverse conditions
    • Installation for TOP Manifold Housing Only

      To install a drip emitter nozzle, remove the cover, then the filter, and insert the drip emitter with the 0-ring into one of the twelve open cavities. Make sure that the grooved area on the cone shaped nozzle and the 0-ring are facing upward. The four color-coded nozzles with different flow rates can be combined in the same TOP head.