Free shipping on orders $149 & up. exclusions apply

TOP Body Assembly Only


TOP Body Assembly Only
In Stock

The TOP 12-outlet manifold housing is designed for retrofitting an existing sprinkler riser into an efficient 12-outlet drip irrigation system. The manifold housing only (without the nozzles) can be used with our color-coded replacement nozzles as an add-on into the 12-outlet manifold. The manifold housing can also be used with one of our 1/4" color-coded converter barbs or elbows and with 1/4" micro tubing if a micro sprinkler or micro sprayer is added into one of the outlets. The TOP manifold housing includes the mini disc filter only.

Part #: D061
$4.44 ea.

The Drip Store’s retrofit systems can be used to convert an existing sprinkler head to a drip system without altering the flow or other capabilities of the original design. The retrofit drip heads are available in 12 outlets, and can be used with individual plants or groups of plants as part of any irrigation system.

Retrofit drip heads or manifolds are designed to adapt any 1/2" riser to a drip irrigation system. They may be incorporated into a new system, or used to convert an existing sprinkler to a 12- outlet drip system. Retrofitting conventional sprinkler systems to low flow water saving drip systems requires a few simple steps that include evaluation of the areas to be watered and selection of the best method to water. The most suitable uses for retrofit drip systems are for shrubs, trees, roses, or individual plants that can be irrigated more efficiently using this system.

  • Dimensions: 3" W x 2" H
  • Emitter dimensions: : Inlet size: 1/2" FNPT
  • Flow rate and Color code: : .5 GPH per outlet: Black , 1 GPH per outlet: Red, 2 GPH per outlet: Green , 3.3 GPH per outlet: Purple
  • Manifold: accepts 1/8" (.187 OD) micro tubing, or purchase 1/4" micro tubing adapters separately for use with 1/4" distribution tubing
  • Materials: Body and cover: high impact plastic , Diaphragm : Silicon, Filter: nylon
  • Mini disc filter: 80 mesh
  • Pressure compensating range: 8 to 80 PSI
  • Recommended pressure: 15 to 50 PSI
  • 1/4" converter elbow and barb allow the use of 1/4" distribution tubing (Parts #D062-65 & SF006, sold separately).
  • 12 individually pressure compensating, self flushing emitters allow easy passage of water and minimize clogging
  • 12-outlet emitter
  • Backup mini-disk filter
  • Color-coded emitters and barbs easily identify flow rate at each zone
  • Each emitter individually filtered (approximately 80 mesh)
  • Flow rates .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3, 12.5 l/h)
  • Inlet plugs provide closure options of up to eight emitter outlets (Part #D075, sold separately)
  • Install above grade or place below grade in a 6" emitter box
  • Interchangeable emitters for variable flow rates in a single head
  • Rugged materials to withstand the most adverse conditions

Installation for TOP Manifold Housing Only

To install a drip emitter nozzle, remove the cover, then the filter, and insert the drip emitter with the 0-ring into one of the twelve open cavities. Make sure that the grooved area on the cone shaped nozzle and the 0-ring are facing upward. The four color-coded nozzles with different flow rates can be combined in the same TOP head.