Bonus Points help your bottom line!
Get 5% Store Credit on Most Purchases.
Free shipping on orders $149 & up.

Product Reviews

Look and see what others have said about our products

Product Tutorials
Resources

Pop Up Drip Irrigation Flag Indicator, 12" with 24" Micro Tubing and Barb

Pop Up Drip Irrigation Flag Indicator, 12 in. with 24 in. Micro Tubing and Barb
In Stock

The DSPI series popup drip irrigation flag indicator utilizes a double seal and an extra-large red color indicator which pops up when a drip irrigation system is pressurized and running.

Part #: DSPI-12B
$6.67 ea.
Image gallery ( hint, after clinking image, try using mouse scroll wheel )

The Pop Up drip irrigation indicators provide a high level of visual confirmation that the irrigation system is running. The large red indicator “pops up” when the valves are open and the system is pressurized. Available in two sizes and with either a ½” MNPT or with 24” micro tubing and barb.

*Install the flag indicator directly into the drip line or drip tubing. Punch a hole into the drip tubing or drip line and insert the barb at the end of the micro tubing into the line. Cover around 2"-4" of the pop up indicator.

  • Materials: Black sleeve: High impact plastic with UV, Cylinder: Polyethylene, Housing: Acetal, O-ring: Buna N, Red Flag: High impact plastic with UV, Spring: Stainless Steel 304
  • Nominal operating pressure : 30 PSI
  • Operating pressure: 15 to 35 PSI
  • Pop-up indicator height: 12" retracted to 21" extended
  • Available in four configurations: 8” and 12” with 1/2” MNPT or 24” micro tubing
  • Can be installed with Excel™ dripline, poly tubing, PVC or used with any drip irrigation system
  • Ideal for sub surface systems and densely planted sites
  • Large red color indicator is clearly visible from a distance
  • Rugged materials can withstand adverse conditions
  • Unique design incorporates a pressure activated, low friction, upper stem seal and a second stage piston seal to ensure reliable operation

Pop Up Indicators Series

Installation for Micro Pop-up Indicators:

Use the DSPI system the same way you would install any other emission device.  The device will not emit any water, but when the system is pressurized a red indicator cup will be raised to indicate the system is running.   

To install the pop-up indicators use one of the two options:

Installation using drip tubing as the main lateral:

With this layout use the complete assembly micro pop-up indicators with 24” micro tubing and barb. Install the pop-up by punching a hole into the side of the drip tubing and inserting the 1/4" barb into the drip tubing. Mount the pop-up indicator about 2-4” above the ground in a visible area between plants.

Installation using PVC pipe as the main lateral:

With this layout use the complete assembly micro pop-up indicators with 1/2" MNPT.  Install the pop-up indicator by installing a PVC tee with 1/2" FNPT and then thread the pop-up into the 1/2" outlet. Mount the micro pop-up indicator about 2-4” above the ground in a visible area between plants.