Used to secure the 1/8” micro tubing with .115 to .118 ID from a single outlet or multi outlet drip emitter into a pot or basket, especially when a large amount of small pots are used. Constructed of UV-resistant high impact plastic.
The stabilizer stake with plug is used to hold down 1/8” micro tubing with .115 to .118 ID near the plant, inside a pot or basket from a single outlet drip emitter. Use the stake to extend the micro tubing to the plant from a multi outlet PC drip emitter and with a PC drip emitter that has an expanded nipple. Use the plug to close the end of the micro tubing if the pot or basket has been removed. The ideal use for this stake is for pots and baskets in greenhouses and nurseries, or if you have a large amount of pots that need to be replaced. Use with our dripper models BG-010, 020 and 050 and with the multi outlet adapter model GB-10U or GB-40U. Constructed of UV-resistant high impact plastic.