The micro sprayers can be used for propagation, humidification, cooling, and irrigation in an inverted position for seedling and cooling in greenhouses, hothouses and nurseries. The micro- sprayers can be connected upside down directly into the main lateral with the assembly that includes, anti-leak device model G102 or G103, micro tubing and weight assembly, model G112 to G114 or on 1/2" female thread base, model G111. Available with flow rates of 42 GPH (brown nozzle)

• Droplet Size: .0008", very fine at 35 PSI
• Flow rate @ 30 PSI: 42 GPH (brown nozzle) with up to 12' diameter
• Mounting: stabilizer weight, anti-leak device, 12" or 24" and 36 " micro tube and barb
• Nominal Flow: 30 PSI
• Operating pressure: 25 to 35 PSI
• Operating Pressure in Overlapping Irrigation: 35 PSI
• Pattern: 360°
• Recommended filtration: 120 mesh
• Recommended layout : 4' to 6' above the bench
• Recommended spacing between micro sprayers laterals: 4' to 6' apart
• Recommended spacing between the micro sprayers: 3' to 4' apart
• Trajectory Angle: Approximately 1°
• Wetting diameter : up to 12' mounting 4' to 6' above ground

• Color coded nozzles for flow rate identification
• Excellent performance with uniform water distribution
• Made of durable materials ensuring resistance to most chemicals and fertilizers for long-lived trouble free operation
• Modular design allows for a wide range of interchangeable components
• Recommended spacing 4' to 6' apart
• Suitable for upright and inverted position