Free shipping on orders $149 & up. exclusions apply

1/2" (16mm) Barb Fittings


1/2" (16mm) Barb Fittings

The Drip Store’s black color 1/2" (16 mm) barbed drip fittings are available in a variety of configurations for 1/2" drip line or drip tubing with .520 to .540 (16mm) ID, providing a low cost and simple method for drip line and drip tubing installation.

Category: 1/2" Barbed

Available ModelsPartPrice
LF300 : 1/2 in.  (16 mm) .520 to .540 ID Barb Connector
1/2" (16 mm) .520 to .540 ID Barb Connector LF300$0.29 ea.
LF302 : 1/2 in.   (16mm) .520 to .540 ID Barbed Elbow
1/2" (16mm) .520 to .540 ID Barbed ElbowLF302$0.41 ea.
LF304 : 1/2 in.   (16 mm) .520 to .540 ID Barbed Tee
1/2" (16 mm) .520 to .540 ID Barbed TeeLF304$0.46 ea.
LF306 : 1/2 in.   (16 mm) .520 to .540 ID Barbed Tee  with 1/2 in.  MNPT
1/2" (16 mm) .520 to .540 ID Barbed Tee with 1/2" MNPTLF306$0.49 ea.
LF308 : 1/2 in.  (16 mm)  .520 to .540 ID Barbed Connector with 1/2 in.   MNPT
1/2" (16 mm) .520 to .540 ID Barbed Connector with 1/2" MNPT LF308$0.49 ea.
LF310 : 3/4 in.   (16 mm)  .520 to .540 ID Barbed Connector with 3/4 in.   MNPT
3/4" (16 mm) .520 to .540 ID Barbed Connector with 3/4" MNPTLF310$0.55 ea.
LF312 : 1/2 in.  (16 mm) .520 to .540 ID Barbed Elbow with 1/2 in.  MNPT
1/2" (16 mm) .520 to .540 ID Barbed Elbow with 1/2" MNPTLF312$0.49 ea.
LF314 : 1/2 in.  (16mm) .520 to .540 ID Starter barb connector with Rubber Grommet
1/2" (16mm) .520 to .540 ID Starter barb connector with Rubber GrommetLF314$0.88 ea.
LF320 : 1/2 in.  (16mm) .520 to .540 ID Barbed Tee with 3/4 in.  MNPT
1/2" (16mm) .520 to .540 ID Barbed Tee with 3/4" MNPTLF320$0.53 ea.
LF510 : 1/2 in.  (16mm) .520 to .540 ID Barbed Tee with 3/4 in.  FNPT
1/2" (16mm) .520 to .540 ID Barbed Tee with 3/4" FNPTLF510$1.36 ea.

The Drip Store’s high impact 1/2" (16mm) barbed fittings are available in various configurations and are used in the installation of 1/2" drip tubing or drip line with .520 ID to .540 ID. By using a double barb action, the tubing is forced over the fittings for a very tight fit. No tools, glue, or clamps are required. Our barbed fittings from DIG Corp are made of high impact UV resistant plastic.

  • Color
    • LF300, LF302, LF304, LF306, LF308, LF310, LF312, LF314, LF320, LF510 : Black
  • Materials
    • LF300, LF302, LF304, LF306, LF308, LF310, LF312, LF314, LF320, LF510 : Barb: Acetal
  • Operating pressure
    • LF300, LF302, LF304, LF306, LF308, LF310, LF312, LF314, LF320, LF510 : up to 30 PSI
  • Use with
    • LF300, LF302, LF304, LF306, LF308, LF310, LF312, LF314, LF320, LF510 : 1/2" drip tubing or drip line with .520 ID to .540 ID
  • Fits all brands of 1/2" (16 mm) polyethylene tubing or drip line with .520 ID to .540 ID
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps
    • 1/2" Barb Fitting suggested installation steps

       

      The 1/2" (16mm) barb fittings are used in the installation of any brand name drip line or drip tubing. To connect the 1/2” (16 mm) drip tubing or drip line, use a hand pruner to cut the drip tubing or drip line, being careful to keep dirt from entering the drip tubing. Insert the barb side of the fitting into the end of the 1/2” drip tubing or drip line by forcing the drip tubing over the barb side.