Bonus Points help your bottom line!
Get 5% Store Credit on Most Purchases.
Free shipping on orders $149 & up.

Product Reviews

Look and see what others have said about our products

Product Tutorials
Resources

1/2" (16 mm) .520 to .540 ID Barbed Tee

1/2 in. (16 mm) .520 to .540 ID Barbed Tee
In Stock

The 1/2" (16 mm) barb tee is used for three-way connection of drip tubing or drip line with .520 ID to .540 ID (16 mm). By using a double barb, the tubing is pushed over the barb for a very tight fit. Use for three-way layout of drip tubing or drip line and for drip tubing repair.

Part #: LF304
$0.46 ea.

The Drip Store’s black color 1/2" (16 mm) barbed drip fittings are available in a variety of configurations for 1/2" drip line or drip tubing with .520 to .540 (16mm) ID, providing a low cost and simple method for drip line and drip tubing installation.

  • Color: Black
  • Materials: Barb: Acetal
  • Operating pressure: up to 30 PSI
  • Use with: 1/2" drip tubing or drip line with .520 ID to .540 ID
  • Fits all brands of 1/2" (16 mm) polyethylene tubing or drip line with .520 ID to .540 ID
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps

1/2" Barb Fitting suggested installation steps

 

The 1/2" (16mm) barb fittings are used in the installation of any brand name drip line or drip tubing. To connect the 1/2” (16 mm) drip tubing or drip line, use a hand pruner to cut the drip tubing or drip line, being careful to keep dirt from entering the drip tubing. Insert the barb side of the fitting into the end of the 1/2” drip tubing or drip line by forcing the drip tubing over the barb side.