Free shipping on orders $149 $99 & up. exclusions apply

1/2" (16 mm) .520 to .540 ID Barbed Connector with 1/2" MNPT


1/2 in.  (16 mm)  .520 to .540 ID Barbed Connector with 1/2 in.   MNPT
In Stock

The 1/2" (16 mm) barb connector X 1/2" MPT and the 1/2" (16 mm) barb connector X 3/4" MPT are used for connecting the drip lateral with .520 ID to .540 ID (16 mm) to a PVC pipe using a PVC tee with 1/2" or 3/4" FNPT. By using a double barb, the tubing is pushed over the barb for a very tight fit. Use for a layout of drip tubing or drip line.

Part #: LF308
$0.49 ea.

The Drip Store’s high impact 1/2" (16mm) barbed fittings are available in various configurations and are used in the installation of 1/2" drip tubing or drip line with .520 ID to .540 ID. By using a double barb action, the tubing is forced over the fittings for a very tight fit. No tools, glue, or clamps are required. Our barbed fittings from DIG Corp are made of high impact UV resistant plastic.

  • Color: Black
  • Materials: Barb: Acetal
  • Operating pressure: up to 30 PSI
  • Use with: 1/2" drip tubing or drip line with .520 ID to .540 ID
  • Fits all brands of 1/2" (16 mm) polyethylene tubing or drip line with .520 ID to .540 ID
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps

1/2" Barb Fitting suggested installation steps

 

The 1/2" (16mm) barb fittings are used in the installation of any brand name drip line or drip tubing. To connect the 1/2” (16 mm) drip tubing or drip line, use a hand pruner to cut the drip tubing or drip line, being careful to keep dirt from entering the drip tubing. Insert the barb side of the fitting into the end of the 1/2” drip tubing or drip line by forcing the drip tubing over the barb side.