Free shipping on orders $149 & up. exclusions apply

Single Station Actuator with 9 Volt DC Solenoid to Convert Manual Anti-siphon Valve


Single Station Actuator with 9 Volt DC Solenoid to Convert Manual Anti-siphon Valve
In Stock

The C056 (DIG R710DC.013) actuator with a 9 VDC solenoid is used to convert any existing 3/4" or 1" manual anti-siphon valve (prevent contaminated water from being siphoned back to the main water supply) to automatic operation.

Part #: C056
$44.30 ea.

Used for drip irrigation and sprinkler systems in residential and light commercial applications, the actuator assembly is used only with our model #C046 (DIG 740.000) four-station battery operated controller.

Connect the two colored 18" solenoid wires to the correct controller valve number, using only water-proof splices. The actuator includes adapters for 3/4" and 1” plastic or brass manual anti-siphon valve.

If used with C046(DIG 740.000)four-station battery operated controller, Use this actuator to convert up to four manual anti-siphon valves to a fully automated four station control manifold without the use of AC power.

This model can be used on any manual anti-siphon valve, and should be mounted only by replacing the top portion on the anti-siphon valve with the manual flow control handle.

This actuator should be installed on a manual anti-siphon valve 8” to 10” above the ground and above the sprinkler line to prevent water downstream of the valve from back-siphoning water into the water supply.
Suggested operating pressure range of 25 to 120 PSI.

  • Dimensions: Controller 3 7/16"W x 2 5/16"D x 7 3/4"H
  • Materials: Actuator body: glass reinforced nylon, Controller: Body - ABS, Inner parts - Acetal , Diaphragm and rubber seal: EPDM, Metal parts and screws: stainless steel 303, Solenoid inner metal parts: stainless steel 303
  • Operating pressure: 25 to 120 PSI
  • Power draw: .2 amp per cycle
  • Power source: 9 Volt DC (one 9-volt alkaline battery not included)
  • Solenoid: Dry latching
  • Temperature range: 38 to 130 F
  • Wiring : Two 18” color coded wires with one red and one black
  • Automatic and manual operation
  • Can be used as a flow control for water flow adjustment and manual shutoff
  • Constructed of glass reinforced nylon with a stainless steel spring; non-corrosive materials
  • Contains adapters required to convert 3/4" and 1" brass or plastic manual anti-siphon valves
  • High flow with low pressure loss
  • Manual flow control can adjusted to zero flow
  • Manual internal bleed override for opening and closing the valve without external water spill
  • Normally closed
  • Rugged, with reinforced and supported self-cleaning diaphragm that provides reliable operation even with dirty water
  • Smooth valve opening and closing prevents pressure surge hazards
  • Three year manufacturer’s warranty