Free shipping on orders $149 & up. exclusions apply

1/2" Barbed Fittings (17mm)


1/2" Barbed Fittings (17mm)

Brown color 1/2” (17 mm) barbed drip fittings.

Category: 1/2" Barbed

Available ModelsPartPrice
F002 : Inline Filter, barb x barb, for 1/2 in.  .700 OD polytubing
Inline Filter, barb x barb, for 1/2" .700 OD polytubingF002$2.97 ea.
LF301 : 1/2 in.   (17 mm)	 .550 to .600 ID Barb Connector 1/2" (17 mm) .550 to .600 ID Barb ConnectorLF301$0.29 ea.
LF303 : 1/2 in.   (17 mm) .550 to .600 ID Barb Elbow 1/2" (17 mm) .550 to .600 ID Barb ElbowLF303$0.41 ea.
LF305 : 1/2 in.   (17 mm) .550 to .600 ID Barbed Tee 1/2" (17 mm) .550 to .600 ID Barbed TeeLF305$0.46 ea.
LF307 : 1/2 in.   (17 mm) .550 to .600 ID  Barbed Tee with 1/2 in.  MNPT
1/2" (17 mm) .550 to .600 ID Barbed Tee with 1/2" MNPT LF307$0.49 ea.
LF309 : 1/2 in.   (17 mm)  .550 to .600 ID Barbed Connector with 1/2 in.  MNPT
1/2" (17 mm) .550 to .600 ID Barbed Connector with 1/2" MNPTLF309$0.49 ea.
LF311 : 3/4 in.   (17 mm) .550 to .600 ID Barbed Connector with 3/4 in.  MNPT
3/4" (17 mm) .550 to .600 ID Barbed Connector with 3/4" MNPT LF311$0.55 ea.
LF313 : 1/2 in.   (17 mm) .550 to .600 ID Barbed Elbow with 1/2 in.  MNPT
1/2" (17 mm) .550 to .600 ID Barbed Elbow with 1/2" MNPT LF313$0.49 ea.
LF315 : 1/2 in.   (17 mm).550 to .600 ID Starter Barb connector with Rubber Grommet 1/2" (17 mm).550 to .600 ID Starter Barb connector with Rubber GrommetLF315$0.89 ea.
LF316 : 1/2 in.  (17mm) .550 to .600 ID Barb Cross  1/2" (17mm) .550 to .600 ID Barb Cross LF316$1.01 ea.
LF317 : 1/2 in.  (17mm) .550 to .600 ID Barb Y with 3/4” MNPT
1/2" (17mm) .550 to .600 ID Barb Y with 3/4” MNPT LF317$1.01 ea.
LF318 : 1/2 in.   (17mm) .550 to .600 ID Starter Barb Connector x Poly
1/2" (17mm) .550 to .600 ID Starter Barb Connector x PolyLF318$0.28 ea.
LF321 : 1/2 in.  (17 mm) .550 to .600 ID Barbed Tee with 3/4 in.  MNPT
1/2" (17 mm) .550 to .600 ID Barbed Tee with 3/4" MNPTLF321$0.53 ea.
LF515 : 1/2 in.  (17 mm) .550 to .600 ID Barbed Tee with 3/4 in.  FNPT
1/2" (17 mm) .550 to .600 ID Barbed Tee with 3/4" FNPTLF515$1.36 ea.

The Drip Store’s high impact 1/2" (17mm) barbed fittings are available in various configurations and are used in the installation of 1/2" drip tubing or drip line with .550 ID to .600 ID. By using a double barb action, the tubing is forced over the fittings for a very tight fit. No tools, glue, or clamps are required. Our barbed fittings from DIG Corp are made of high impact UV resistant plastic.

  • Color
    • LF301, LF303, LF305, LF307, LF309, LF311, LF313, LF315, LF316, LF317, LF318, LF321, LF515 : Brown
  • Materials
    • LF301, LF303, LF305, LF307, LF309, LF311, LF313, LF315, LF316, LF317, LF318, LF321, LF515 : Barb: Acetal
  • Operating pressure
    • LF301, LF303, LF305, LF307, LF309, LF311, LF313, LF315, LF316, LF317, LF318, LF321, LF515 : up to 30 PSI
  • Use with
    • LF301, LF303, LF305, LF307, LF309, LF311, LF313, LF315, LF316, LF317, LF318, LF321, LF515 : 1/2" drip tubing or drip line with .550 ID to .600 ID
  • Fits all brands of 1/2" (17 mm) polyethylene tubing or drip line with .550 ID to .600 ID
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps
    • LF301, LF303, LF305, LF307, LF309, LF311, LF313, LF315, LF316, LF317, LF318, LF321 : 17 mm Barb Fittings

      The 1/2" (17 mm) barb fittings are used in the installation of any brand name drip line or drip tubing. To connect the 1/2" (17 mm) drip tubing or drip line, use a hand pruner to cut the drip tubing or drip line, being careful to keep dirt from entering the drip tubing. Insert the barb side of the fitting into the end of the 1/2" drip tubing or drip line by forcing the drip tubing over the barb side.

    • LF515 : 1/2" Barb Fitting suggested installation steps

       

      The 1/2" (16mm) barb fittings are used in the installation of any brand name drip line or drip tubing. To connect the 1/2” (16 mm) drip tubing or drip line, use a hand pruner to cut the drip tubing or drip line, being careful to keep dirt from entering the drip tubing. Insert the barb side of the fitting into the end of the 1/2” drip tubing or drip line by forcing the drip tubing over the barb side.