3 or 4 Zones, 3/4" 9 VDC Control Valve Manifold Assembly with Flow Control
The Drip Store’s 3 and 4-zone manifold with 3/4” DC control (9 VDC) high flow valve and 1" swivel fittings are assembled without using glue or tools. Each of the valve manifolds fitting inlets has a large swivel with female thread and an encapsulated large "O" ring to ensure a watertight connection. The design allows for quick connection and dis-assembly of the valves without tools.
Category:
AC & DC Valve Manifolds
| Available Models | Part | Price | | |
|---|
 | 3 Zone 1” Manifold Assembly with 3/4" Control Valve (9 VDC) and Flow Control | VA051 | $135.76 ea. | |
 | 4 Zone 1” Manifold Assembly with 3/4" Control Valve (9 VDC) and Flow Control | VA052 | $175.76 ea. | |
Body Styles
- VA051, VA052 : globe valve
Manifold size
- VA051, VA052 : 1” with female swivel thread
Manifold operating pressure:
- VA051, VA052 : 10 to 120 PSI
Manifold thread
- VA051, VA052 : inlet and outlet female swivel pipe threads (FNPT)
Materials
- VA051, VA052 : Body and swivel: polypropylene with UV
- VA051, VA052 : Diaphragm: nylon fabric reinforced polyisoprene (NR)
- VA051, VA052 : Metal parts and screws: stainless steel 304
- VA051, VA052 : O-ring: nitril rubber
- VA051, VA052 : Valve body and cover: glass reinforced nylon
Power source
- VA051, VA052 : 9 Volt DC (one 9-volt alkaline battery not included)
Solenoid
- VA051, VA052 : Dry latching
- VA051, VA052 : with manual override
Solenoid thread
Valve flow rate
- VA051, VA052 : 1": .2 to 35 GPM
Valve size
Waterproof
24" solenoid wire with waterproof connection to the controller
7 day programming schedule or 1-30 day intervals
Automatic and manual operation
Battery life up to one year
Ease of Installation
-
The system can be installed without special tools or glue, and with limited knowledge, making the installation a very simple process.
Easy in-line maintenance
Easy to read AM/PM clock
Flow control handle adjusts water flow as needed.
Flow control handle adjusts water flow as needed.
Heavy-duty construction with non corrosive materials
High flow with low pressure loss
Independent programming for each valve (four station)
Inlet and outlet female swivel pipe threads (FNPT).
Manual bleed for on/off operation
Powered by 1, 9-volt alkaline battery featuring low power consumption
Powered by one 9 volt alkaline battery
Rugged, with reinforced and supported self-cleaning diaphragm that provides reliable operation even with dirty water
Smooth valve opening and closing prevents pressure surge hazards
UV resistant, high impact plastic
Water budget from 5-95% in 5% increments
Watering duration from one minute to eleven hours and 59 minutes in one minute increments
Weather resistant
Withstands harsh climatic conditions, completely waterproof
-
Installation for Valve Manifolds
Example: A valve manifold starting from a 1” PVC pipe:
1. Glue to the PVC pipe a PVC adapter with 1” MPT
2. Connect a swivel manifold with 1, 2, 3 or 4 outlets depending on the number of valves in the manifold.
3. To the outlet side of the valve with the swivel connect a PVC male adapter
4. Glue the PVC pipe to the male adapter
5. Turn the water on and flush the line
6. Close the end of the manifold using the end cap
7. Pressurize the system and make sure that water is not leaking from the unit or any part along the line. Test the assembly manually and then automatically via the controller, and then program the controller.
Note: Make sure that the water flow direction matches for each component, if any is in line with the water flow. Use Teflon Tape only with the PVC male adapter and make sure to remove all Teflon tape excess.
Valves & Drip Zones
