Glue this insert into a 1" PVC coupling using a PVC glue and use it to connect a 1" PVC to a 1" drip tubing
The Drip Store’s compression fittings from DIG Corporation are constructed of molded ultraviolet-resistant high impact plastic and are available to fit most sizes of drip tubing and drip line from 1/2” to 1".
The Drip Store's 1" compression fittings with 1.20 OD are used in the installation of a drip irrigation system that uses 1" 1.20 OD drip tubing.
To connect the drip tubing into the custom compression fitting, insert the drip tubing into the compression side of the fitting, pushing and wiggling the tubing back and forth into the fitting. The compression fitting side uses a simple wrist action and the drip tubing is "walked" into the fittings for a very tight fit, ensuring a quality watertight connection.