DIG Corporation's Flow Regulated Insect Proof Micro Sprinklers
The flow regulated insect proof micro sprinklers are designed to achieve a consistent flow rate in areas with pressure fluctuations and in difficult topography. The flow regulated micro sprinkler has a floating silicon diaphragm with a large water passage to regulate flow, and an integral filter attached to the nozzle to keep particles from entering the nozzle. The flow regulated micro sprinkler’s frame is constructed without a bridge ensuring complete 360-degree coverage for better uniformity.
Micro Sprinklers, Orchard Irrigation, DIG Micro Sprinklers
|Insect Proof Flow Regulated Micro Sprinkler Assembly with 7 GPH Purple Nozzle ||MSA017|
$1.79 - $2.29 ea.
|Insect Proof Flow Regulated Micro Sprinkler Assembly with 11 GPH Black Nozzle ||MSA018||$2.29 $1.15|
|Insect Proof Flow Regulated Micro Sprinkler Assembly with 13 GPH Black Nozzle ||MSA016||$2.29 $1.15|
- MSA017, MSA018, MSA016 : Medium
- MSA017, MSA018, MSA016 : Minimum of 120 Mesh
- MSA017, MSA016 : 7 GPH (silver blue nozzle) with 16’ diameter, 11 GPH (black nozzle) with 17' diameter or 13 GPH (black nozzle) with 18’ diameter
- MSA017, MSA018, MSA016 : Polyacetal
- MSA017, MSA018, MSA016 : 20 to 50 PSI
Recommended micro-sprinkler spacing
- MSA017, MSA018, MSA016 : Full Circle 360°
- MSA017, MSA018, MSA016 : one per tree - the black nozzle 8' to 10' apart.
- MSA017, MSA018, MSA016 : Approximately 11°
Frame construction without a bridge provides a complete 360 degree circle
Head closes downwards after operation to prevent dirt and insects from entering the sprinkler (insect proof)
Integral filter to protect the regulating silicon disc from large particles
Made of durable plastic materials ensuring resistance to most chemicals and fertilizers used in landscape and agriculture
Press fit configuration for easy maintenance
Reduces costs due to smaller diameter pipe and longer laterals when operating under higher pressure
Stake has depth measurements imprinted for precise installation
Standard assembly includes 24" micro tubing with .160 OD x .270 ID, 13” spike and barb
Strong spinner propulsion at low pressure
Trouble free operation even at low pressure
Installation for Insect Proof Micro Sprinklers
To install the 360-degree micro sprinkler use the complete assembly with spike, micro tubing and barb. To replace the head of the micro sprinkler, pull the head with the nozzle out of the assembly and replace with a new head with the same color nozzle. Make sure to flush the line before inserting the new head with the nozzle. No tool or glue is required.
To install the micro sprinklers, first select the flow rate and the micro sprinkler recommended spacing. Use the assembly with the spike and the micro tubing by first inserting the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.