Free shipping on orders $149 & up. exclusions apply

360° Micro Sprayer Assembly 42 GPH Brown


360° Micro Sprayer Assembly 42 GPH  Brown
Available For Order

The 360° micro sprayers with brown nozzle are available with 13” stake, 24” micro tubing and 1/4" barb. The micro sprayers have a flow rate of 42 GPH @ 30 PSI with spray pattern of 12’ diameter. The 360° micro sprayer assembly is designed for applications including seedlings, rooting, flowerbeds and for greenhouse use. The micro sprayers produce fine droplets and are available with a number of flow rate options.

Part #: MSA044
$2.37 - $2.87 ea.
+ 1$2.87 ea.
+ 11$2.73 ea.
+ 101$2.60 ea.
+ 1001$2.37 ea.

The Drip Store has a wide range of micro sprayers and jets to meet all of today‘s requirements for micro irrigation needs. The no moving parts micro sprayers can be used for a wide range of applications and are available in 360° patterns, used for small diameter and for watering that requires fine droplets size with low precipitation rates. When low volume overhead irrigation is desired for an area where drip emitters are not practical and micro sprinkler diameters and moving parts are not required nor preferred, the micro sprayers or jets may be what are needed. Like micro sprinklers, micro sprayers and jets are available in a wide variety of styles, flow rates, diameters, and configurations. Like micro sprinklers, they operate at low pressure and require a filter to protect the small orifice of the sprayer from clogging. The main advantage of micro sprayers to some users and growers could be the lack of moving parts and the small to medium sized droplets and coverage.

  • Assembly includes: spike, micro tubing and barb
  • Available with three flow rates: Brown nozzle: 42 GPH with up to 12’ diameter
  • Droplet Size: .0008", very fine at 45 PSI
  • Filter requirement: 120 mesh (130 micron)
  • Materials: Polyacetal
  • Nominal operating pressure : 30 PSI
  • Operating pressure: 25 to 35 PSI
  • Operating Pressure in Overlapping Irrigation: 35 PSI
  • Pattern: 340°
  • Trajectory Angle: Approximately 1°
  • Wetting diameter : up to 12’'
  • Color coded nozzles for flow rate identification
  • Excellent performance with uniform water distribution
  • High uniformity due to distribution accuracy and low precipitation rate
  • Maintains constant humidity if used in greenhouses
  • Modular design allows for a wide range of interchangeable components

Installing Micro Sprayer Assembly

To install the micro sprayer use the complete assembly with spike, micro tubing and barb.

To install the micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayerwith the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.