Pop Up drip irrigation indicators provide a high level of visual confirmation that your drip irrigation system is running. The large red indicator “pops up” when the valves are open and the system is pressurized. =Available in four configurations: 8” and 12” with either ½”MNPT or with 24” micro tubing and barb.
Category: Micro Pop Up Indicators
|Pop Up Drip Irrigation Indicator, 8" with 1/2" MNPT||DSPI-08||$5.99 ea.|
|Pop UpDrip Irrigation Indicator, 8" with 24" Micro Tubing and Barb||DSPI-08B||$6.28 ea.|
|Pop Up Drip Irrigation Indicator, 12" with 1/2" MNPT||DSPI-12||$6.58 ea.|
|Pop Up Drip Irrigation Flag Indicator, 12" with 24" Micro Tubing and Barb||DSPI-12B||$6.67 ea.|
Installation for Micro Pop-up Indicators:
Use the DSPI system the same way you would install any other emission device. The device will not emit any water, but when the system is pressurized a red indicator cup will be raised to indicate the system is running.
To install the pop-up indicators use one of the two options:
Installation using drip tubing as the main lateral:
With this layout use the complete assembly micro pop-up indicators with 24” micro tubing and barb. Install the pop-up by punching a hole into the side of the drip tubing and inserting the 1/4" barb into the drip tubing. Mount the pop-up indicator about 2-4” above the ground in a visible area between plants.
Installation using PVC pipe as the main lateral:
With this layout use the complete assembly micro pop-up indicators with 1/2" MNPT. Install the pop-up indicator by installing a PVC tee with 1/2" FNPT and then thread the pop-up into the 1/2" outlet. Mount the micro pop-up indicator about 2-4” above the ground in a visible area between plants.