Free shipping on orders $149 & up. exclusions apply

12-Jet Sprayer and Deflectors


12-Jet Sprayer and Deflectors

Category: Micro Sprayers

Available ModelsPartPrice
MS006 : 360° 12-Jet Sprayer 360° 12-Jet SprayerMS006$0.53 $0.40
MSA006 : 360° 12-Jet Assembly
360° 12-Jet AssemblyMSA006$1.45 $1.31
DF090 : 90° Deflector for MS006 & MSA006 Color Green
90° Deflector for MS006 & MSA006 Color GreenDF090$0.15 ea.
DF180 : 180° Deflector for MS006 & MSA006, Color Orange
180° Deflector for MS006 & MSA006, Color OrangeDF180$0.15 ea.

The 360° 12-jet sprayer has a 12-jet pattern and is available with Quick Thread or fully assembled with 13” stake, 24” micro tubing and 1/4" barb. The 12-jet sprayers have a flow rate of around 10 GPH @ 30 PSI with spray pattern of up to 6’ diameter using the 360-degree pattern with the fully assembled unit. The12-jet sprayers have no moving parts and are ideal for use under the canopies of small to medium trees or shrubs. The 12-jet sprayers have additional insert deflectors that can convert the 360-degree pattern into a 180-degree or 90-degree pattern with each sold separately.

  • Assembly
    • DF090, DF180 : 10/32 thread or fully assembled with spike, micro tubing and barb
  • Assembly includes
    • MS006, MSA006 : spike, micro tubing and barb
  • Droplet Size
    • MS006, MSA006, DF090, DF180 : Small
  • Flow rate
    • MS006, MSA006, DF090, DF180 : 10 GPH @ 30 PSI with coverage of 3’ to 10' diameter.
  • Recommended filtration
    • MS006, MSA006, DF090, DF180 : 120 mesh
  • Recommended pressure
    • MS006, MSA006, DF090, DF180 : 15 to 30 PSI
  • Available completely assembled on 12" spike with 24” (.160 ID x .270 OD) micro tubing and barb
  • Available on 10/32 thread and completely assembled on 13" spike with 24” (.160 ID x .270 OD) micro tubing and 1/4" barb
  • Can be attached into the end of 1/4" micro tubing or into the 1/2" drip tubing.
  • Can be replaced with one of two available deflectors
  • Color coded deflectors for easy identification
  • Trouble free operation with no moving parts
    • Installing 12 Jet Micro Sprayers

      To install the 12-jet micro sprayer, use the complete assembly with spike, micro tubing and barb. You can use this sprayer with one of our poly riser assemblies available in our accessories section. To change the 360 degrees to 90 or 180 degrees snap one of the deflectors on top of the 360-degree pattern 12-jet sprayer.

      To install the 12-jet micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayerwith the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.