5” Hold Down Stake for 1/2” Drip Tubing
In Stock
Plastic stakes used to hold the 1/4" micro drip tubing, 1/4" micro drip line, 1/4" laser drilled soaker hose, 1/4" porous tubing, 1/2" drip tubing, drip line and 3/4" drip tubing to the ground.
(
5 ratings/reviews )
The 5" hold down stake is used to hold the 1/2" drip tubing or drip line to the ground. Use the stake every 5-10’ in the installation layout of the 1/2" drip tubing and drip line. Constructed of UV-resistant high impact plastic.
By: rharris1951, 06/16/11
By: bdickhaus, 11/16/08
I agree with previous reviews, these are too short for my application. I have raised beds, and at least 6" to 8" is loose soil. For these to work I need 8" to 10". I'm going to look around to see what I can find.
By: tamoore, 09/13/07
I agree with the previous post, it is just too short to hold 1/2" tubing in place.
By: Fred Vroom, 06/25/06
An essential item for keeping polytubes in the proper position for watering, but it is often too short in loose soil. Different sizes such as 9 and 12 inches or 8, 10 & 12 inches would be a big asset.
By: ron kolarovic, 06/15/06
Works, but is too short to stay in the ground. It gets pulled out as tubing expands/contracts.
- Use the flow controlled stakes with drip emitter model BG-010, 020 and 050 and with the multi outlet adapter model GB-10U or GB-40U :
- Available in metal or plastic in two colors
- For secure and easy installation of 1/4", 1/2" and 3/4" micro tubing, distribution tubing, 1/4" drip line and drip tubing
- Heavy duty and rugged stakes design for a wide range of layouts and applications
- Use to extend or hold the micro tubing near the plants or secure 1/4" and 1/2" to the ground
- UV resistant, high impact plastic
Irrigation Kits
