Free shipping on orders $149 & up. exclusions apply

Drip Irrigation and Micro-Sprayer Kit with Hose End Timer


Drip Irrigation and Micro-Sprayer Kit with Hose End Timer
On Special - In Stock

This complete Drip Irrigation and Micro Sprayer Kit includes hose end timer, 11 micro sprinklers and 20 1-GPH PC drip emitters. This kit is for gardens planted with roses, shrubs, ground cover and flowerbeds to cover up to 700 SF.

Part #: GE200PLUS
$96.59 $82.10

See Added Parts to expand your system by purchasing additional pieces separately.

The GE200PLUS Drip Irrigation and Micro Sprayer Kit from DIG Corporation contains a hose end timer, 3/4" backflow device, a 25-PSI 3/4" preset pressure regulator, a 3/4" swivel adapter, 200’ of high quality 1/2" drip tubing with 600” ID x .700” OD, 50’ of 1/4" micro tubing, 11 assembled micro sprayers with 360, 180 and 90 degree spray patterns, with 13” stakes and 24” of micro tubing, and 20 1-GPH (gallons per hour) pressure-compensating drip emitters. In addition the kit includes a wide range of components to water a garden planted with roses, shrubs, ground cover, flowerbeds and trees up to 700 SF. The DIG Drip Irrigation and Micro Sprayer Kit can accommodate expansion up to 1000 SF using additional drip hose, drip emitters and micro sprayers with flow rates of up to 220 GPH.

One of the most important features of a drip irrigation system is the creation of a totally new and more favorable root zone environment within the planting. Drip irrigation or micro sprinklers can sustain this environment by using low flow rates to maintain constant soil moisture levels. This encourages better growth and disease resistance by reducing plant stress.

This GE200PLUS Drip Irrigation and Micro Sprayer Kit is a complete irrigation kit that has all the parts needed to install a drip irrigation and micro sprayer system from a hose faucet (spigot).

Note: The pressure regulator (included) is used to lower the incoming pressure to the suggested operating pressure of 25 PSI, which is within the range of recommended pressures for a drip irrigation system or micro sprinkler system.

  • Maximum incoming operating pressure: 100 PSI
  • Operating pressure: 25 to 30 PSI
Kit QtyPart #ImageDescription
4A006A006 :  Figure “8” Hose End for 1/2” Drip Tubing  Figure “8” Hose End for 1/2” Drip Tubing
1A013A013 : 3/4 in.   FHT Basic Pressure Regulator, 25 PSI 3/4" FHT Basic Pressure Regulator, 25 PSI
1A015A015 : Backflow Preventer 3/4 in.  FHT x  3/4 in.  MHT Backflow Preventer 3/4" FHT x 3/4" MHT
1A019A019 : Palm Hole Punch Palm Hole Punch
1C092C092 : DIG Corporation 2-Dial  in. EZ in.  hose end timer, 3/4 in.  FHT x MHT DIG Corporation 2-Dial "EZ" hose end timer, 3/4" FHT x MHT
20D076D076 : 1 GPH PC Drip Emitter,  Color Black, DIG DIG1 GPH PC Drip Emitter, Color Black, DIG
1LF001LF001 : 1/2 in.  .700 OD Compression Coupling  1/2" .700 OD Compression Coupling
1LF003LF003 : 1/2 in.  .700 OD Compression 3/4 in.  FHT Swivel Adapter with Screen  1/2" .700 OD Compression 3/4" FHT Swivel Adapter with Screen
4LF005LF005 : 1/2 in.  .700 OD Compression Tee  1/2" .700 OD Compression Tee
4LF007LF007 : 1/2 in.  .700 OD Compression Elbow  1/2" .700 OD Compression Elbow
3MSA001MSA001 : 360° Spray Jet on Stake Assembly  360° Spray Jet on Stake Assembly
4MSA002MSA002 : 180° Spray Jet on Stake Assembly  180° Spray Jet on Stake Assembly
4MSA003MSA003 : 90° Spray Jet on stake Assembly  90° Spray Jet on stake Assembly
20S005S005 : 4” Supporting Stake for 1/8” or  1/4” Micro Tubing 4” Supporting Stake for 1/8” or 1/4” Micro Tubing
10S006S006 : 5” Hold Down Stake for 1/2” Drip Tubing 5” Hold Down Stake for 1/2” Drip Tubing
12SF001SF001 : 1/4 in.   Barbed Connector, Long 1/4" Barbed Connector, Long
1SF003SF003 : DIG 1/4 in.  Barbed Tee DIG 1/4" Barbed Tee
1SF007SF007 : Goof Plugs, Strip of 10  Goof Plugs, Strip of 10
1T009T009 : 50’, 1/4 in.  Vinyl Black Micro Tubing  50’, 1/4" Vinyl Black Micro Tubing
1T060T060 : DIG Corporation Drip Tubing, 200 ft. , 1/2 in.  coil  with .700 OD 200 ft. , 1/2 in.  coil  with .700 ODDIG Corporation Drip Tubing, 200’, 1/2" coil with .700 OD
KIT GE200PLUS contains a total of 95 pcs. for $82.10
ImageDescriptionPart #PriceQty.
A006 :  Figure “8” Hose End for 1/2” Drip Tubing  Figure “8” Hose End for 1/2” Drip Tubing A006$0.13 ea.
A013 : 3/4 in.   FHT Basic Pressure Regulator, 25 PSI 3/4" FHT Basic Pressure Regulator, 25 PSIA013$5.59 ea.
A015 : Backflow Preventer 3/4 in.  FHT x  3/4 in.  MHT Backflow Preventer 3/4" FHT x 3/4" MHTA015$3.11 ea.
A019 : Palm Hole Punch Palm Hole PunchA019$1.74 ea.
C092 : DIG Corporation 2-Dial  in. EZ in.  hose end timer, 3/4 in.  FHT x MHT DIG Corporation 2-Dial "EZ" hose end timer, 3/4" FHT x MHTC092$30.99 $26.34
D076 : 1 GPH PC Drip Emitter,  Color Black, DIG, DIG DIG1 GPH PC Drip Emitter, Color Black, DIG, DIGD076$0.25 - $0.28 ea.
LF001 : 1/2 in.  .700 OD Compression Coupling  1/2" .700 OD Compression Coupling LF001$0.48 ea.
LF003 : 1/2 in.  .700 OD Compression 3/4 in.  FHT Swivel Adapter with Screen  1/2" .700 OD Compression 3/4" FHT Swivel Adapter with Screen LF003$1.02 ea.
LF005 : 1/2 in.  .700 OD Compression Tee  1/2" .700 OD Compression Tee LF005$0.72 ea.
LF007 : 1/2 in.  .700 OD Compression Elbow  1/2" .700 OD Compression Elbow LF007$0.69 ea.
MSA001 : 360° Spray Jet on Stake Assembly  360° Spray Jet on Stake Assembly MSA001$1.04 ea.
MSA002 : 180° Spray Jet on Stake Assembly  180° Spray Jet on Stake Assembly MSA002$1.04 ea.
MSA003 : 90° Spray Jet on stake Assembly  90° Spray Jet on stake Assembly MSA003$1.04 ea.
S005 : 4” Supporting Stake for 1/8” or  1/4” Micro Tubing 4” Supporting Stake for 1/8” or 1/4” Micro TubingS005$0.13 ea.
S006 : 5” Hold Down Stake for 1/2” Drip Tubing 5” Hold Down Stake for 1/2” Drip TubingS006$0.28 ea.
SF001 : 1/4 in.   Barbed Connector, Long 1/4" Barbed Connector, LongSF001$0.07 - $0.12 ea.
SF003 : DIG 1/4 in.  Barbed Tee DIG 1/4" Barbed TeeSF003$0.08 - $0.13 ea.
SF007 : Goof Plugs, Strip of 10  Goof Plugs, Strip of 10 SF007$0.25 - $0.29 ea.
T009 : 50’, 1/4 in.  Vinyl Black Micro Tubing  50’, 1/4" Vinyl Black Micro Tubing T009$4.19 ea.
T060 : DIG Corporation Drip Tubing, 200 ft. , 1/2 in.  coil  with .700 OD, 200 ft. , 1/2 in.  coil  with .700 OD 200 ft. , 1/2 in.  coil  with .700 ODDIG Corporation Drip Tubing, 200’, 1/2" coil with .700 OD, 200’, 1/2" coil with .700 ODT060$21.87 ea.