The 180-degree micro spray jet comes on a Quick Thread base. The micro spray jet has a flow rate of 14 GPH @ 30 PSI with spray pattern of up to 7’ diameter. This two part series of spray jets has no moving parts and can be used in home gardens for ground cover, flowerbeds and trees.
The Drip Store has a wide range of micro sprayers and jets to meet all of today‘s requirements for micro irrigation needs. The no moving parts micro sprayers can be used for a wide range of applications and are available with 90°, 180°, 360° and strip patterns for small to large diameters and for watering that requires small droplet size with low precipitation rates. When low volume overhead irrigation is desired for an area where drip emitters are not practical and micro sprinkler diameters and moving parts are not required nor preferred, the micro sprayers or jets may be what are needed. Like micro sprinklers, micro sprayers and jets are available in a wide variety of styles, flow rates, diameters, and configurations. Like micro sprinklers, they operate at low pressure and require a filter to protect the small orifice of the sprayer from clogging. The main advantage of micro sprayers to some users and growers could be the lack of moving parts and the small to medium sized droplets and coverage.
To install the micro sprayer use the complete assembly with spike, micro tubing and barb. The micro sprayer should be used with one of our poly riser assemblies available in our accessories section.
To install the micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayer with the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.