5/8" Drip Tape Fittings

The Drip Store’s wide range of 5/8” drip tape fittings have many features for easy installation and improved performance. The Drip Store drip tape fittings work exceptionally well and can be used with all major brands of drip tape.

Category: Drip Tape

Available Models		Part	Price
	5/8" Drip Tape Connector	A023	$0.85 ea.
	5/8" Tape Loc x 1/2" barbed connection with .600 ID for connection to a .600 ID x .700 OD polytubing.	A024R	$0.61 ea.
1 review	5/8" Drip Tape Connector End	A027	$0.40 ea.
	5/8" Drip Tape Connector to 1/2" Male Pipe Thread	A028	$0.81 ea.
1 review	5/8" Drip Tape Connector to 1/4" Barb	A026	$0.63 ea.
	3/4" FHT Swivel Adapter with Screen x 5/8" Drip Tape	A025	$2.30 ea.
1 review	5/8" Drip Tape Adapter to .700 OD Drip Tubing	A024		Discontinued
	5/8" x 5/8" x 5/8" Drip Tape Connector Tee	A090	$1.90 ea.
	5/8" x 5/8" Drip Tape Connector Elbow	A091		Discontinued
1 review	5/8" Drip Tape Connector with Flush Cap	A031	$1.68 ea.
	5/8" x 5/8" Drip Tape Connector with Shut-Off Valve	A092	$2.39 ea.
	5/8" Drip Tape Connector x 1/4" Barb with Shut-Off Valve	A093	$2.18 ea.
	5/8" x 5/8" Ro-Drip Tape Coupling	A087	$0.50 ea.
	5/8" Tape Line End with Flush Valve	A088	$2.01 ea.
	5/8" Drip Tape to Lay Flat	A099	$0.62 ea.
	3/4" MHT x 5/8 Ro Drip Tape End Cap	A089	$0.97 ea.

Description
Specifications
Features
Instructions

The Drip Store’s 5/8” drip tape fittings are used for the installation of 5/8” drip tape. The drip tape fittings are available with many configurations (and in a variety of sizes) to meet any requirements in the installation layout of a drip tape. The Drip Store’s drip tape fittings work exceptionally well up to 30 PSI and can be used with all major brands of drip tape.

Flush Valve Closing Pressure

A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A088, A099, A089 : 7 PSI

Flush Valve Opening Pressure

A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A088, A099, A089 : 7 PSI

Recommended pressure

A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A088, A099, A089 : Up to 30 PSI

Recommended pressure

A024R : 10 to 30 PSI

Fits all brand name 5/8” drip tape

Made with high impact UV resistant plastic

No glue or tools are required

Secure and easy installation without glues or clamps

A023, A027, A028, A026, A025, A024, A090, A091, A031, A092, A093, A087, A088, A099, A089 : Installation for Drip Tape
Drip tape can be installed easily either above or below the ground. The fittings are designed mainly for use in vegetable gardens or for row crops below or above grade. Use these drip tape fittings to connect a 5/8” drip tape into drip tubing, PVC pipe or lay-flat pipe.

Basic layout:

Most often, a vegetable garden or row crops is planted in parallel rows. This makes the layout of a drip tape very easy. If using a poly tubing as the main line per each zone, run the mainline of 1/2", 3/4" or 1” drip tubing perpendicular and along the rows and to the end of the designed zone.

Steps to install the drip tape:

Step 1: Near each row, punch a hole in the drip tubing using a punch.

Step 2: Insert a drip tape reducer (see A026) into the drip tubing by inserting the barb side of the drip tape, with one per each row.

Step 3: Connect the drip tape into the tape connector side by turning the sleeve counter-clockwise, inserting the drip tape over the barb end of the connector and turning the sleeve clockwise to lock.

Step 4: Lay out the drip tape along the row and near the plants

Step 5: Turn the water on and flush the line

Step 6: Close the end of the drip tape using the tape end model A027, A031 or A033 with flush valve