1/2" x 1/2" Barbed Ball Valve, 16mm
In Stock
The 1/2" barbed ball valve is used as on/off valve for a drip tubing or drip line lateral. The ball valve can be used with individual 1/2" drip tubing with .620-640 OD and 16 mm drip line with a .640 OD.
Choose the correct model ball valve to match the diameter of the drip line, drip tubing, or poly tubing you need to shut off – 1/4", 1/2", 16mm, 17mm, or 3/4” x 17mm - for downstream or upstream repair of an individual line or lateral.
- Barbed inlet and outlet :
- Operating pressure:
up to 60 PSI
- Recommended pressure:
Up to 50 PSI
- Temperature range:
Up to 120 F
- Constructed of polypropylene and other non-corrosive materials
- High flow with low pressure loss
- Low-torque handle
- Smooth opening and closing eliminates pressure loss
- Used with two "O" rings for watertight seals
1/2" Barbed Ball Valves
1/4" MPT x 1/4" MPT Nipple
1/2" Barbed Ball Valve, .600 ID inlet and outlet, 1
100', 18” Spacing, 1/2" (16 mm) .95 GPH PC Drip
500', 18” Spacing, 1/2" (16 mm) .95 GPH PC Drip L
100', 12” Spacing, 1/2" (16 mm) .58 GPH PC Drip
100', 18” Spacing, 1/2" (16 mm) .58 GPH PC Drip
500', 18” Spacing, 1/2" (16 mm) .58 GPH PC Drip
60" x 1/4" Micro Tubing Assembly with Butterfly Bar
Dan Anti-Mist Device, Color Blue
50', 1/2" with .620 OD Drip Tubing
Irrigation Kits