Free shipping on orders $149 $99 & up. exclusions apply

Professional Gun Punch and Replacement Tips


Professional Gun Punch and Replacement Tips

The professional gun punch from DIG is heavy duty punch that has the option to change pins as needed and quickly and easily punches precise uniform holes in any of the 1/2" or 3/4" sizes of drip irrigation tubing for insertion of drip emitters, micro sprinklers and 1/4" barbed fittings. The gun punch features an easy to grip handle and two additional interchangeable heat-treated replacement steel pins (not included with the punch). Using this punch, the hole punched are always in the center of the drip tubing and there is no danger of cutting through to the other side of the drip tubing. Absolutely safe to use, the blade tip retracts fully after use to protect the user. If used with 3/4" drip tubing, remove the blue sleeve under the pin, which easily slides out for removal. Constructed of UV-resistant, high impact plastic.

Category: Punches & Tools

Available ModelsPartPrice
A035 : Professional Gun Punch Professional Gun PunchA035$13.95 ea.
A049 : Professional Gun Punch Replacement Tip 2 mm, Red Professional Gun Punch Replacement Tip 2 mm, RedA049$10.19 ea.
A041 : Professional Gun Punch Replacement Tip 3 mm, Blue Professional Gun Punch Replacement Tip 3 mm, BlueA041$7.62 ea.
A050 : Professional Gun Punch Replacement Tip 4 mm, Green Professional Gun Punch Replacement Tip 4 mm, GreenA050$10.54 ea.

Punches and drip tubing cutters are common tools used in the layout and installation of a micro irrigation system. The punches come in various sizes and are used to punch holes in the drip tubing for the insertion of drip emitters or 1/4" barbed fittings. The drip tubing cutters are used to cut the drip tubing where needed. Together, the punches and cutters provide the installer with the main tools needed for the installation of a drip irrigation system.

The punches and cutters offered by The Drip Store are accessories used in installation of a micro irrigation system. They are used to punch holes, to cut or to insert connectors into the drip or micro tubing. The Drip Store’s range of punch and cutter accessories includes:

· Basic palm punches: Inexpensive and used only for punching holes into drip tubing.
· Professional Gun Punch: Used for punching a large number of holes into drip tubing, using a durable heavy-duty heat-treated pin.
· Professional Gun Punch with Tubing Cutter: Used for punching a large number of holes into the drip tubing, using a durable, heavy-duty heat-treated pin and includes a cutter to cut the drip tubing.
· Cutters: Used for cutting the drip tubing.

  • UV resistant, high impact plastic
  • Used to punch holes into the drip tubing or to cut the drip or micro tubing