Free shipping on orders $149 up. exclusions apply

1/2" .700 OD Compression Coupling x 1/2" PVC slip

1/2 in.  .700 OD Compression Coupling x 1/2 in.  PVC slip
In Stock

The 1/2" PVC Coupling with compression insert for .700 OD drip tubing is use to connect a 1/2" PVC pipe to 1/2" with.700 OD drip tubing.

Part #: A009
$0.65 ea.

The Drip Store's 1/2" compression drip fittings with .700 OD are used in the installation of drip irrigation using .690 OD, .700 OD and .704 OD drip tubing.

  • Color: Black
  • Materials: Body: ABS, Inserts: Polycarbonate
  • Maximum pressure: 60 PSI
  • Operating pressure: 10 to 30 PSI
  • Color coded
  • Fits all DIG 1/2" polyethylene tubing with .690 OD, .700 OD and .704 OD
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps
  • Use with any PVC glue

Installation for 1/2" Compression Fittings

To connect the 1/2" drip tubing, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the drip tubing. Hold the fitting in one hand and the drip tubing in the other and force the tubing into the fitting while wiggling the drip tubing from side to side. "Walk" the drip tubing into the fitting until about 1/2" to 3/4" of the drip tubing is inside the fitting.

Note: For other size tubing use the fittings with black insert for DIG® (.700 OD),  blue insert for Toro® blue stripe tubing (.710 OD)and the fittings with green insert for Rain Drip® and Rain Bird®(.620 OD)