Free shipping on orders $149 up. exclusions apply

500’, 1/4" Vinyl Brown Micro Tubing

500’, 1/4 in.  Vinyl Brown Micro Tubing
In Stock

The Drip Store vinyl micro tubing from DIG is used for commercial, agriculture and residential applications.

Part #: T037
$35.82 ea.
  ( 1 rating/review )

The Drip Store vinyl 1/4" micro tubing is available in a few colors and in several lengths of up to 3000’. Our commercial grade flexible vinyl micro tubing is made of the highest quality resins and is UV resistant. Available in 50', 100’, 500, 1000 and 3,000' The Drip Store micro tubing is used for a wide range of applications. The 1/4” micro tubing can be used as a feeder line from 1/2" poly tubing to extend drip emitters or micro sprinklers, with our 4, 6 and 12 outlet drip emitters and for a complete 1/4" drip system.

By: ralleia, 07/02/07

More flexible than the black microtube. I prefer this hands down even if it costs a couple bucks more.

  • Bending radius: 3"
  • Materials: Vinyl
  • Maximum flow rate: 35 GPH per line
  • Operating pressure: up to 60 PSI
  • Size: 1/4" .156 ID x .245 OD
  • Stiffness: 90 shore
  • Warranty: Five year manufacturer’s limited warranty
  • Available in 100' and 500' coils
  • Use ¼” barbed fittings
  • UV resistant

Installation Methods using 1/4" Micro Tubing

The basic use of 1/4" the micro tubing is as a feeder line from the 1/2" drip tubing, with the 12 outlet drip emitter and as part of a complete system using the 1/4" as the main lateral. To connect the micro tubing to the drip tubing, first, insert a 1/4" barb or 1/4" tee into the micro tubing, then, use the punch to make a hole in the drip tubing and then, insert the barb into the hole in the drip tubing. Use the micro tubing as a feeder line to reach plants or clusters of plants that are away from the drip tubing and install a dripper or micro sprayer at the end of the micro tubing.