Model C002 3/4" FHT x MHT digital hose end timer with four start times per day from Dig Corporation. This is the updated model (DIG model B09D) of The Drip Store's best selling digital hose end watering timer.
The C002 (DIG B09D) is the new and improved 3/4" digital hose end timer with LCD display. With the ability to flow up to 6.3 GPM, this easy to use and program hose end timer is designed to connect to your garden spigot and may be used with drip irrigation or sprinklers. The unit uses one 9-volt alkaline battery that can last from one to two years. With higher flow rates at lower inlet pressures and a range of programming features, the C002 delivers a reliable and cost effective solution for residential use.
•¾” FHT inlet and MHT outlet
•Easy programming using six buttons and large LCD display
•AM / PM clock
•Watering duration from 1 minute to 12 hours 59 minutes in 1 minute intervals
•7 day watering calendar
•Four start times per day
•Preset program of 5 minutes watering every day
•Electronic battery monitoring that provides constant reading of battery strength
•Five part battery strength indication: 4, 3, 2, 1 bar and then flashing one bar on close down
•Low battery auto lock out to ensure that the timer valve will not open unless it can close
•Low energy use (less than 20 micro amps in standby mode) ensures long battery life
•Easy manual operations using Start and Stop buttons.
•Rain mode easily accessed by holding the OFF key for 3 seconds
•High water flow at normal water pressures.
•Operates on low water flow of less than 0.5gpm
•High strength female hose thread connection with easy removal via spring clip
•3/4" FHT inlet with screen and MHT outlet
•Powered by one 9-volt alkaline battery with attery life up to one year
•3 year limited warranty
•Operating pressure 10 PSI to 140 PSI (0.6 – 9.8 Bar)
•Flow rate up to 6.3 gpm at 30 PSI (24 L/PM at 2 Bar)
•Temperature range: 40°F to 125° F (3° C to 50° C)
•Power source: 9-volt alkaline battery (not included)
•Solenoid: durable electric motor
•Power consumption: 20 micro amps in standby mode
•Materials: body ABS, and inner parts of high impact plastic
•Dimensions: 6” D X 4” W x 6.5” H ( 15.2 cm X 10.0 cm X 16.2 cm)
•Watering duration from 1 minute up to 12 hours and 59 minutes
•Duration can be set in one minute increments
•Watering frequency: can be programmed in a 7 day watering calendar. In weekly schedule the controller can be programmed to operate on any days of the week such as Monday, Wednesday, and Friday. In weekly schedule the controller can be programed with up to four start times per day.