Free shipping on orders $149 & up. exclusions apply

3/4" "Y" Screen Filter with Flush Cap


3/4" "Y" Screen Filter with Flush Cap

The Drip Store’s 3/4" male pipe thread inlet and outlet filters from DIG are available with plastic or stainless steel screens.

Category: Screen Filters

Available ModelsPartPrice
F302 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap,  120 mesh polyester, brown    120 mesh polyester, brown
3/4" MNPT "Y" Screen Filter with Flush Cap, 120 mesh polyester, brown F302$8.16 ea.
F303 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap, 155 mesh polyester,  green 155 mesh polyester,  green
3/4" MNPT "Y" Screen Filter with Flush Cap, 155 mesh polyester, greenF303$8.16 ea.
F304 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap, 200 mesh polyester, purple 200 mesh polyester, purple3/4" MNPT "Y" Screen Filter with Flush Cap, 200 mesh polyester, purpleF304$8.16 ea.
F305 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap, 80 mesh stainless steel, blue   80 mesh stainless steel, blue
3/4" MNPT "Y" Screen Filter with Flush Cap, 80 mesh stainless steel, blue F305$11.32 ea.
F306 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap, 120 mesh stainless steel, brown   120 mesh stainless steel, brown
3/4" MNPT "Y" Screen Filter with Flush Cap, 120 mesh stainless steel, brown F306$11.32 ea.
F307 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap, 155 mesh stainless steel, green   155 mesh stainless steel, green
3/4" MNPT "Y" Screen Filter with Flush Cap, 155 mesh stainless steel, green F307$11.32 ea.

The filter screens are readily accessible for easy removal and cleaning. This line of filters includes a flush cap for easy removal of particles trapped in the bottom of the filter.

Screen filters are the most common filters used in the irrigation industry and in most cases the least expensive. They are generally used as a backup for any type of drip irrigation installation and are mainly installed where the quality of water is good. Screen filters are excellent for removing hard particulates from water, such as sand and other small elements often found in city water. The screen filters are not suitable for removing organic materials such as algae, mold and slime. These non-solid materials tend to embed themselves into the screen material where they are very difficult to remove. In other cases they simply slide through the holes in the screen by temporarily deforming their shape. Screen filters are cleaned by removing and hand cleaning the screen.

  • Dimensions
    • F302, F303, F304, F305, F306, F307 : Filter, 3/4"and 1": 4.7/8" H x 7"
  • Filter configuration
    • F302, F303, F304, F305, F306, F307 : 3/4" or 1" NPT male inlet and outlet
  • Filter cylinder length
    • F302, F303, F304, F305, F306, F307 : 6"
  • Filter surface area
    • F302, F303, F304, F305, F306, F307 : 28.5 square inches
  • Materials
    • F302, F304, F305, F306, F307 : Filter housing: Polypropylene
    • F302, F303, F304, F305, F306, F307 : O-ring: EPDM
    • F302, F303, F304, F305, F306, F307 : Screen: Stainless or polyester
  • Maximum flow rate
    • F302, F303, F304, F305, F306, F307 : 3/4": 11 GPM
  • Maximum working temperature
    • F302, F303, F304, F305, F306, F307 : 130 degree F
  • Operating pressure
    • F302, F303, F304, F305, F306, F307 : up to 120 PSI
  • Recommended flow rate
    • F302, F303, F304, F305, F306, F307 : up to 11 GPM
  • Size
    • F302, F303, F304, F305, F306, F307 : 3/4"
  • Available with flushing plastic ball valve
  • Available with or without manual shut off valves
  • Color-coded replacement screens
  • Easy maintenance: the screen can be extracted from the filter for easy cleaning
  • Large filtration area allows longer intervals between flushing
  • Largest flow path in the industry – less susceptible to plugging.
  • Low friction loss
  • Molded plastic construction with stainless steel screen
  • Non corrosive materials
  • Resistant to chemicals and fertilizers commonly used in landscaping
  • Screens have excellent resistance to most common chemicals
  • Wide range of polyester and stainless steel screens in 80 to 200 mesh
    • Installation for 3/4" and 1" MNPT Screen Filter

      Starting the irrigation system from a PVC pipe:

      1.       Connect a 3/4” and 1" MNPT filter directly to the outlet of an AC valve or battery operated controller.

      2.       Connect a 3/4” and 1"  25 PSI FNPT x MNPT pressure regulator to the filter.

      3.       Connect a 3/4" and 1" FNPT swivel adapter to the 3/4” 25 PSI pressure regulator.

      4.       To start the drip system, connect the poly drip tubing to the adapter by wiggling and forcing the drip tubing into the compression side of the adapter.

      5.        Lay out the drip tubing to the garden area. The 1/2” drip tubing is used as the main line for drip systems into which drip emitters, micro sprinklers or 1/4”  micro tubing are inserted

      • ·  Make sure that the water flow direction matches for each component, if it is in line with the water flow.
      • ·  Use Teflon Tape only with the filter and make sure to remove all Teflon tape excess.
      • ·  Pressurize the system and make sure that water is not leaking from the unit or any part along the line. Test the assembly manually and automatically via the controller and then program the controller.

       

       

      Flow rates in GPM for 3/4" and 1" versus head loss in PSI

      Flow rates 3/4"

      5.2

      8.1

      11.8

      16.2

      19

      22

      24.4

      Head loss

      0.8

      1.05

      3.8

      7.3

      10.2

      13.7

      17.1

      Flow rates 1"

      5.5

      11.2

      19.6

      25.1

      28.3

      32.1

      ?

       

      0.5

      2.2

      7.1

      11.9

      15.3

      19.8

      ?