Free shipping on orders $149 & up. exclusions apply

Replacement Stainless Steel Screen for 2" Filters


Replacement  Stainless Steel Screen for 2" Filters

The Drip Store provides a wide range of replacement plastic or stainless steel screens for our 3/4”, 1” 1-1/2” and 2” filters. Use the replacement screen to replace or update the screen in your filter.

Category: Replacement Screens

Available ModelsPartPrice
F328 : Model F328  2 in.  Stainless Steel Replacement Screen, 80 mesh, blue 80 mesh, blue
Model F328 2" Stainless Steel Replacement Screen, 80 mesh, blueF328$54.41 ea.
F329 : Model F329  2 in.  Stainless Steel Replacement Screen , 120 mesh, brown 120 mesh, brown
Model F329 2" Stainless Steel Replacement Screen , 120 mesh, brownF329$54.41 ea.
F330 : Model F330  2 in.  Stainless Steel Replacement Screen  , 150 mesh, green 150 mesh, green
Model F330 2" Stainless Steel Replacement Screen , 150 mesh, greenF330$54.41 ea.
F335 : Model F335  2 in.  Stainless Steel Replacement Screen, 200 mesh, purple 200 mesh, purple
Model F335 2" Stainless Steel Replacement Screen, 200 mesh, purpleF335$55.55 ea.

The 3/4”, 1”, 1-1/2” and 2” filter screens are readily accessible for easy removal and cleaning. These screens can be used as replacement screens in any of The Drip Store’s current line of screen filters.
Screen filters are the most common filters used in the irrigation industry and in most cases the least expensive. They are generally used as a backup for any type of drip irrigation installation and are mainly installed where the quality of water is good. Screen filters are excellent for removing hard particulates from water, such as sand and other small elements often found in city water.

The screen filters are not suitable for removing organic materials such as algae, mold and slime. These non-solid materials tend to embed themselves into the screen material where they are very difficult to remove. In other cases they simply slide through the holes in the screen by temporarily deforming their shape. The screen filters are cleaned by removing and hand cleaning the screen.

  • Color
    • F328 : Blue
    • F329 : Brown
    • F330 : Green
    • F335 : Purple
  • Materials
    • F328, F329, F330, F335 : O-ring: EPDM
    • F328, F329, F330, F335 : Screen: Stainless Steel
  • Maximum flow rate
    • F328, F329, F330, F335 : 2": 80 GPM
  • Maximum working temperature
    • F328, F329, F330, F335 : 130 degree F
  • Operating pressure
    • F328, F329, F330, F335 : up to 120 PSI
  • Size
    • F328, F329, F330, F335 : 1-1/2" or 2"
  • Available sizes: 3/4", 1", 1-1/2" and 2"
  • Color-coded replacement screens
  • Easy maintenance: the screen can be extracted from the filter for easy cleaning
  • For 2" filters: Model #’s F323 through F324
  • Large filtration area allows longer intervals between flushing
  • Low friction loss
  • Molded plastic construction with polyester screen
  • Molded plastic construction with stainless steel screen
  • Non corrosive materials
  • Polyester screen and Stainless screen cylinder chemical resistance:
    • Acid: very good resistance depending on concentration and temperature. Resistance to most mineral acids is excellent.
    • Alkali: limited resistance depending on concentration and temperature. Excellent resistance to low concentration lyes. Dissolves in highly concentrated lyes at higher temperatures.
    • Generally the screens show no evidence of toxicity and have excellent resistance to decay and bacteria.
    • Organic solvents: excellent resistance. Some phenolic compounds and hot nitrobenzene dissolve the screens
    • Oxidizing agents: good resistance
  • Rubber "O" rings on both ends ensure a quality seal
  • Screens have excellent resistance to most common chemicals
  • Wide range of polyester and stainless steel screens in 40 to 200 mesh