A one inch (1") anti-siphon valve with 24 volt solenoid connection, this valve can be used for sprinkler or drip systems in any residential application. For use with A/C controllers Anti-siphon valves should be installed 8” to 10” above the ground, and above the sprinkler line, to prevent water downstream of the valve from back siphoning into the water supply This unit should be operated in a pressure range of 25 to 120 PSI.

• City of Los Angeles and Canadian Standards Association listing approved :
• Flow rate: 1": .2 to 35 GPM
• Inlet size: 1" male pipe thread
• Maximum incoming operating pressure: Up to 120 PSI.
• Solenoid: 24 V AC

• Anti-siphon valve is used to prevent irrigation water downstream of the valve from reentering the water supply, especially important when automatically applying fertilizer through a filter
• Available in two sizes
• Rugged materials can withstand adverse conditions
• Use with drip or sprinkler systems
• Used for above grade installation