For conversion of manual anti-siphon valve to 24 volt A/C power.
The C075 is a heavy duty actuator kit to convert most 3/4" or 1" brass or plastic manual anti-siphon valves. Used for drip irrigation or sprinkler system upgrades in residential or commercial applications, and as a cost-effective repair, mount the C075 on any anti-siphon valve by replacing the top portion on the anti-siphon valve including the manual flow control handle.
An anti-siphon valve is used to prevent contaminated water from being siphoned back to the main water supply. This controller should be installed 8” to 10” above the ground and above the sprinkler line to prevent water downstream of the valve to back siphon into the water supply. This unit should be operated in a pressure range of 25 to 120 PSI.