Free shipping on orders $149 & up. exclusions apply

1/2”, 16mm, 17mm, and 3/4” x 17mm Barbed Ball Valves


1/2”, 16mm, 17mm, and 3/4” x 17mm Barbed Ball Valves

Category: Ball Valves

Available ModelsPartPrice
A007 : 1/2 in.  Barbed Ball Valves  1/2" Barbed Ball Valves A007$1.91 ea.
A130 : 3/4 in.  Female Thread Ball Valve  X  .520 ID (16 mm) Barb
3/4" Female Thread Ball Valve X .520 ID (16 mm) Barb A130$3.28 ea.
A122 : 1/2 in.  Barbed Ball Valve, .600 ID inlet and outlet, 17mm
1/2" Barbed Ball Valve, .600 ID inlet and outlet, 17mmA122$2.78 ea.
A117 : 1/2 in.  x 1/2 in.  Barbed Ball Valve, 16mm
1/2" x 1/2" Barbed Ball Valve, 16mmA117$2.89 ea.
A123 : 3/4 in.  FNPT x 1/2 in.  Barbed Ball Valve, 17mm
3/4" FNPT x 1/2" Barbed Ball Valve, 17mmA123$2.78 ea.
A047 : 3/4 in.  Barb x 3/4 in.  Barbed Ball Valve, Green for 3/4 in.  .940 OD polytube Green for 3/4 in.  .940 OD polytube
3/4" Barb x 3/4" Barbed Ball Valve, Green for 3/4" .940 OD polytubeA047$3.67 ea.

The barbed ball valves are used as shut-off valves for individual drip lines, soaker hoses, drip tubing or micro tubing. Use these ball valves with micro tubing laterals, drip line laterals or poly tubing laterals.

  • Barbed inlet and outlet
    • Materials
      • A130 : Body: Polpropylene
      • A130 : O-ring: Buna N
    • Operating pressure
      • A007, A130, A122, A117, A047 : up to 60 PSI
    • Recommended pressure
      • A007 : 10 to 30 PSI
      • A122, A117 : Up to 50 PSI
    • Recommended pressure
      • A047 : 10 to 30 PSI
    • Temperature range
      • A007, A122, A117, A047 : Up to 120 F
      • A130 : Up to 130°F
    • Constructed of polypropylene and other non-corrosive materials
    • High flow with low pressure loss
    • Inlet and outlet with Buna-N O-rings ensures watertight seals
    • Large handle for easy manual control
    • Low-torque handle
    • Rapid 1/4" turn on and off for tight, no drip, shut off
    • Smooth opening and closing eliminates pressure loss
    • True union design
    • Used with two "O" rings for watertight seals