Free shipping on orders $149 & up. exclusions apply

3/4" "Y" Screen Filter with Hose Thread


3/4" "Y" Screen Filter with Hose Thread

The Drip Stores' 3/4" swivel female hose thread inlet and male outlet filters from DIG are available with plastic screens and are used with a faucet connection.

Category: Screen Filters

Available ModelsPartPrice
F300 : 3/4 in.   in. Y in.  Style Filter with Hose Threads, 155 mesh, polyester screen, green 155 mesh, polyester screen, green3/4" "Y" Style Filter with Hose Threads, 155 mesh, polyester screen, greenF300$9.50 ea.
F301 : 3/4 in.   in. Y in.  Style Filter with Hose Threads, , 200 mesh polyester screen, purple 200 mesh polyester screen, purple
3/4" "Y" Style Filter with Hose Threads, , 200 mesh polyester screen, purpleF301$10.50 ea.

The filter screens are readily accessible for easy removal and cleaning. This line of filters includes a female hose thread inlet and male hose thread outlet.

Screen filters are the most common filters used in the irrigation industry and in most cases the least expensive. They are generally used as a backup for any type of drip irrigation installation and are mainly installed where the quality of water is good. Screen filters are excellent for removing hard particulates from water, such as sand and other small elements that are often found in city water. The screen filters are not suitable for removing organic materials such as algae, mold and slime. These non-solid materials tend to embed themselves into the screen material where they are very difficult to remove. In other cases they simply slide through the holes in the screen by temporarily deforming their shape. To clean the filter screen filters, unthread the cover are, remove the screen and wash under stream of water

  • Filter cylinder length
    • F300, F301 : 6"
  • Filter dimensions for 3/4" and 1"
    • F300, F301 : 4.7/8" H x 7" W
  • Filter surface area
    • F300, F301 : 28.5 square inches
  • Materials
    • F300, F301 : Filter housing: Polypropylene
    • F300, F301 : O-ring: EPDM
    • F300, F301 : Screen: Polyester
  • Maximum flow rate
    • F300, F301 : 3/4": 11 GPM
  • Maximum working temperature
    • F300, F301 : 130 degree F
  • Operating pressure
    • F300, F301 : up to 120 PSI
  • Recommended flow rate
    • F300, F301 : up to 11 GPM
  • Size
    • F300, F301 : 3/4"
  • Available with flushing plastic ball valve
  • Available with or without manual shut off valves
  • Color-coded replacement screens
  • Easy maintenance: the screen can be extracted from the filter for easy cleaning
  • Large filtration area allows longer intervals between flushing
  • Low friction loss
  • Molded plastic construction with polyester screen
  • Non corrosive materials
  • Screens have excellent resistance to most common chemicals
  • Wide range of polyester screens in 150 to 200 mesh
    • Installation for Filters

      Starting the irrigation system from a faucet:

      This filter is used to protect the drip system and is installed before the pressure regulator.

      1.  Connect a ¾” FHT x MHT filter to a back-flow device if used or directly to a controller male outlet or faucet if the back-flow device is not used.

       

      Flow rates in GPM for 3/4" and 1" versus head loss in PSI

      Flow rates 3/4"

      5.2

      8.1

      11.8

      16.2

      19

      22

      24.4

      Head loss

      0.8

      1.05

      3.8

      7.3

      10.2

      13.7

      17.1

      Flow rates 1"

      5.5

      11.2

      19.6

      25.1

      28.3

      32.1

      ?

       

      0.5

      2.2

      7.1

      11.9

      15.3

      19.8

      ?