Free shipping on orders $149 & up. exclusions apply

3/4" Drip Tubing with .940 OD


3/4"  Drip Tubing with .940 OD

The Drip Store high quality drip tubing with .940 OD from DIG Corporation, some time described as blank tubing, poly tubing or polyethylene tubing is used for commercial, agriculture and residential applications of drip irrigation installation.

Category: 3/4" Drip Tubing

Available ModelsPartPrice
T303 : 250’, 3/4” Drip Tubing with .940 OD
250’, 3/4” Drip Tubing with .940 ODT303$47.99 ea.
T302 : 500 ft. ,  3/4 in.  drip tubing, .940 OD 500’, 3/4" drip tubing, .940 ODT302$76.99 ea.

Polyethylene drip tubing is used as the main lateral or as the sub-lateral in the design and installation of drip irrigation or low volume irrigation systems on a wide range of applications, including commercial, agriculture and residential. The 3/4" polyethylene drip tubing, with .940 OD, from DIG Corporation is available in 250’ and 500’ coils. This 3/4” tubing is made of Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin. The poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength. The Dow FINGERPRINT™ DFDA-7510 drip tubing from DIG includes an anti-oxidant to protect the end product from thermal degradation with 5% concentrated carbon black. The materials selected contain the Dow FINGERPRINT™ (trace element) that certifies the product and provides verification as to the identity of the drip tubing in the event of failure.

  • Bending radius
    • T303, T302 : 10"
  • Color
    • T303, T302 : Black
  • Compatibility
    • T303, T302 : Interchangable (can be used with) other manufacturer brands of the same .OD size tubing and fittings
  • Materials
    • T303, T302 : Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin
  • Maximum flow rate
    • T303, T302 : 510 GPH (8.5 GPM)
  • Minimum flow rate
    • T303 : 220 GPH (3.6 GPM)
  • Operating pressure
    • T303, T302 : 10 to 60 PSI
  • Recommended pressure
    • T303, T302 : 25 to 30 PSI
  • Size
    • T303, T302 : 3/4" .820 ID x .940 OD
  • UV
    • T303, T302 : 5% concentrated carbon black
  • Use with
    • T303, T302 : 3/4" fittings
  • Warranty
    • T303, T302 : Five year manufacturer’s limited warranty
  • Available in 250' and 500' coils
  • Contains the Dow FINGERPRINT™ (trace element) for identification in the event of failure
  • The drip tubing exhibits outstanding environmental stress-cracking resistance and burst strength