Category: 1/4" Drip Line
|100’, 12" Spacing, 1/4" .5 GPH Drip Line||T025||Discontinued|
Both drip emitters and dripper line are manufactured from high quality material that can withstand chemicals and fertilizers. the non PC drip irrigation dripper line discharge the same amount of water under a preset pressure range of 15 to 20 PSI.
The micro drip line can be installed below or above the ground and if used above the ground can be covered with mulch to blend it with the landscape. To connect the micro drip line to drip tubing, use our 1/4" barbed fittings.
Some knowledge about drip irrigation systems can give a well-informed contractor or installer an advantage in a very competitive market. Many installations could benefit from the addition of drip irrigation, such as in strip planting, boxes, planters, sloped areas, windy areas, oddly shaped areas and green roofs. Contractors or installers with expertise in micro irrigation can select the appropriate installation method and products for applications such as overlap irrigation on strip planting using micro drip line with pre-inserted drip emitters (in a variety of spacing and low flow rates), strip planting using a below grade drip system , containers and boxes using micro drip line with 6” to 9” spacing, a conventional irrigation method of PVC pipe with risers using multi outlet drip emitters or, for oddly shaped flowerbeds or closely spaced plantings, using micro sprayers in a variety of flow rates and diameters. Each of these options provides the contractor with the tools and the flexibility to offer his customers installation packages that include a blend of options which set him apart from his competitors.
Suggestions for below grade installation:
Designed for use on small areas, such as containers, narrow plantings, green roofs, or oddly shaped layouts, the small diameter Micro-Line presents installation flexibility for many applications.